直接固相聚合法制备半芳香尼龙5T/56
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河南省材料与化工研究生联合培养基地(YJS2022JD50);耐高温半芳香聚酰胺合成技术开发及应用研究(223339)


Semi-Aromatic Nylon 5T/56 Prepared by Direct Solid State Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    半芳香尼龙是电子电气及汽车制造领域不可或缺的高性能耐高温工程塑料,近年来需求量日益增大,引起了研究工作者的高度关注,我国生物法戊二胺的规模化生产为半芳香尼龙5T共聚物的研究开发提供了坚实基础。文中以喷雾干燥法制备的尼龙5T/56盐(摩尔比为6:4)为原料,利用直接固相聚合法(DSSP)制备了生物基半芳香尼龙5T/56。通过对聚合条件的系统研究,实现了对物料物理状态的控制,进而实现了尼龙盐的DSSP聚合,得到了相对分子质量较大的粉末状聚合产物。利用傅里叶变换红外光谱和核磁共振氢谱确认了尼龙5T/56的结构;利用差示扫描量热仪得到初生态产物的熔点和热焓为319 ℃和90.7 J/g;利用热重分析仪得到初始热分解温度(Td5%)为403 ℃;力学性能测试得到拉伸强度为85.7 MPa,断裂伸长率为15.4%,缺口冲击强度为2.66 kJ/m2。研究结果表明,采用DSSP制备尼龙5T/56具有反应温度低、反应周期短、产品色泽好、综合性能良好的特点,为易溶于水的共混半芳香尼龙盐高效聚合技术的开发提供了一定的参考。

    Abstract:

    Semi- aromatic nylon is an indispensable high performance and high temperature resistant engineering plastic variety in the field of electronic and electrical engineering and automobile manufacturing. In recent years, the demand is increasing, which has attracted the attention of researchers. The large-scale production of biological pentenediamine in our country provides a solid foundation for the research and development of semi- aromatic nylon 5T copolymer. In this paper, nylon 5T/56 salt (mole ratio of 6:4) prepared by spray drying method was used as raw material to prepare bio-based semi-aromatic nylon 5T/56 by direct solid state polymerization (DSSP). Through the systematic study of polymerization conditions, the physical state of the material was controlled, then the DSSP polymerization of nylon salt was realized, and the powder polymerization product with high molecular weight was obtained. The structure of nylon 5T/56 was confirmed by Fourier transform infrared spectroscopy and hydrogen NMR spectroscopy. The melting point and enthalpy of the initial products are 319 ℃ and 90.7 J/g obtained by differential scanning calorimeter, respectively. The initial thermal decomposition temperature (Td5%) is 403 ℃ measured by TG. The tensile strength is 85.7 MPa, the elongation at break is 15.4%, and the notched impact strength is 2.66 kJ/m2. All the results show that the preparation of nylon 5T/56 by DSSP has the characteristics of low reaction temperature, short period, good product color and comprehensive properties, which provides a certain reference for the development of efficient polymerization technology of water-soluble blending semi-aromatic nylon salt.

    参考文献
    相似文献
    引证文献
引用本文

雪冰峰,张 烨,刘航卓,付 鹏,崔 喆,张袁铖,李 鑫,庞新厂,赵 蔚,张晓朦,刘民英.直接固相聚合法制备半芳香尼龙5T/56[J].高分子材料科学与工程,2025,41(3):33-42. Bingfeng Xue, Ye Zhang, Hangzhuo Liu, Peng Fu, Zhe Cui, Yuancheng Zhang, Xin Li, Xinchang Pang, Wei Zhao, Xiaomeng Zhang, Minying Liu. Semi-Aromatic Nylon 5T/56 Prepared by Direct Solid State Polymerization[J]. Polymer Materials Science & Engineering,2025,41(3):33-42.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-06-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司