异氰酸酯扩链改性对聚(4-羟基丁酸酯)结构与性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省高等学校青创科技支持计划(2023KJ312);烟台开发区科技领军人才经费资助项目


Effect of Isocyanate Chain Extension and Modification on Structure and Properties of Poly (4-hydroxybutyrate)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚(4-羟基丁酸酯) (P4HB) 是一种生物可降解的脂肪族聚酯,具有韧性高、降解速率优异和降解产物生物相容性好等优点,但较低的熔体强度和结晶速率等限制了其加工应用。为了改善P4HB的熔体强度和结晶速率,选用芳香族的4, 4’-二苯基甲烷二异氰酸酯(MDI)和脂肪族六亚甲基二异氰酸酯(HDI)做扩链剂,在二月桂酸二丁基锡(DBTDL)的催化下通过熔融加工对P4HB进行扩链改性。通过优化催化剂和扩链剂的用量,系统研究了异氰酸酯扩链剂对P4HB熔体强度、结晶行为和力学性能的影响。研究发现,MDI可以更好地提升P4HB的熔体强度和力学性能,而HDI可以更好地提高P4HB的结晶温度和结晶速率。当P4HB与MDI的投料摩尔比为1:3时,P4HB的冲击强度由8.4 kJ/m2提高到25.1 kJ/m2,熔体流动速率由158 g/10 min降低到20 g/10 min。当P4HB与HDI的投料摩尔比为1:2.5时,P4HB的结晶温度由20.8 ℃升高到32.6 ℃。

    Abstract:

    Poly (4-hydroxybutyrate) (P4HB) is a biodegradable aliphatic polyester with advantages such as high toughness, excellent degradation rate, and good biocompatibility of degradation products. However, its processing and application are limited by its low melt strength and crystallization rate. In order to improve the melt strength and crystallization rate of P4HB, aromatic 4, 4'- diphenylmethane diisocyanate (MDI) and aliphatic hexamethylene diisocyanate (HDI) were selected as chain extenders. P4HB was chain extended via melt reaction by the catalysis of dibutyltin dilaurate (DBTDL). The amount of catalyst and chain extenders was optimized. The effects of isocyanates chain extender on the melt strength, crystallization behavior, and mechanical properties of poly (4-hydroxybutyrate) was systematically studied. Research has found that MDI can better enhance the melt strength and mechanical properties of P4HB, while HDI can better increase the crystallization temperature and rate of P4HB. When the mole ratio of P4HB to MDI is 1:3, the impact strength of P4HB increases from 8.4 kJ/m2 to 25.1 kJ/m2, and the melt flow rate decreases from 158 g/10 min to 20 g/10 min. When the mole ratio of P4HB to HDI is 1:2.5, the crystallization temperature of P4HB increases from 20.8 ℃ to 32.6 ℃.

    参考文献
    相似文献
    引证文献
引用本文

王子豪,陶安民,李 志,宋红玮,付小会,阚 泽.异氰酸酯扩链改性对聚(4-羟基丁酸酯)结构与性能的影响[J].高分子材料科学与工程,2025,41(3):43-52. Zihao Wang, Anmin Tao, Zhi Li, Hongwei Song, Xiaohui Fu, Ze Kan. Effect of Isocyanate Chain Extension and Modification on Structure and Properties of Poly (4-hydroxybutyrate)[J]. Polymer Materials Science & Engineering,2025,41(3):43-52.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-06-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司