Abstract:Separation of dyes and salts in dye wastewater treated with composite nanofiltration membranes was a major challenge, and there was an urgent need to develop a new composite loose nanofiltration membrane with high retention of dyes and high permeability to salts. In the paper, composite polyvinylidene fluoride (PVDF) loose nanofiltration membranes were prepared by co-deposition of piperazine (PIP), polyethyleneimine (PEI) and dopamine (DA) with terephthaloyl chloride (TMC) in place of the PEI/DA co- deposition system, and then interfacially polymerized with TMC. The effect of mass ration of PIP/PEI on the structure and performance of PVDF composite nanofiltration membrane and its effect on the treatment of simulated RB5 dye wastewater were investigated. The results show that with the increase of m(PIP)/m(PEI), the surface nodularity and roughness of PVDF composite loose nanofiltration membrane increase, the thickness of the selective layer and the PEG800 retention firstly decreases and then increases, and the fluxes of pure water and dye wastewater firstly increase and then decrease. The best performance of the composite nanofiltration membrane is achieved when the m(PIP)/m(PEI) is 50/50, at which the fluxes of pure water and dye wastewater are 26.6 L/(m2?h) and 17.1 L/(m2?h), respectively, which are 70.5% and 119.2% higher than those of the PIP/DA co- deposition system, and the interception rates of RB5 and NaCl are 96.3% and 1.7%, respectively. The above results indicate that using PIP/PEI/DA instead of PEI/DA as co-deposition system can effectively increase the flux and NaCl permeability of PVDF composite loose nanofiltration membranes, and at the same time, ensure a higher dye retention rate, so that the dye and salt can be better separated.