Abstract:Polylactic acid (PLA) has attracted attention as a biodegradable material in recent years, but its inherent brittleness limits its further application and requires toughening modification. Thermoplastic polyurethane (TPU), as a highly tough rubber, can effectively improve the impact toughness of PLA. However, due to their poor compatibility, the toughening effect is limited. In this paper, a reactive compatibilizer, HY-EP epoxy resin, was used to bind with hydroxyl or carboxyl groups on PLA and TPU during the melt blending process to form chemical bonds through epoxy ring-opening reaction. The compatibility of the PLA/TPU composites is improved by strong interfacial action to improve the mechanical properties. The results of differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), dynamic mechanical thermal analysis (DMTA), scanning electron microscopy (SEM) and other tests show that the compatibility of the composite material is significantly improved. When the content of HY-EP is 3 phr, the impact strength of the PLA/TPU/HY-EP (90/10/3) composite can reach up to 15.08 kJ/m2, which is nearly five times higher than that of neat PLA, and the elongation at break reaches 337.56% with the tensile strength of 50.42 MPa, indicating that PLA/TPU composites with both high strength and toughness were prepared successfully.