Abstract:As one of the three major components of paper-based friction materials, the cross-linking and curing effect of resin will directly determine the performance of paper-based friction materials. Under different curing conditions, the resins show differences in curing process and properties. In order to explore the curing process and mechanism of polyamide modified phenolic resin, the effect of heating rate on the curing process of the system was studied by differential scanning calorimetry (DSC). The dynamic thermomechanical properties of paper-based friction materials after resin impregnation were analyzed by dynamic mechanical analysis (DMA), and the changes of stiffness and viscosity of polyamide modified phenolic resin during curing process were obtained. By directly measuring the NIR and FT-IR of the first-order resin, the changes of chemical groups during curing process were obtained. The results show that the curing of resin experiences two stages of gelation and vitrification, mainly the condensation reaction between hydroxymethyl groups and the substitution reaction with active hydrogen in the benzene ring. The curing of the resin is divided into two stages during heating curing; 160 ℃ is the best constant temperature curing temperature of polyamide modified phenolic resin. The storage modulus of the curing system is 1432 MPa, the complex viscosity is 227.6 MPa·s, and the glass transition temperature of the prepared paper-based friction material is 210 ℃. The dynamic thermal mechanical properties are stable, and the thermal stability and mechanical strength retention rate are high.