Abstract:Conductive elastomer composites have a wide application prospect in the field of vibration reduction and isolation. However, conductive elastomer composites usually exhibit shoulder peak phenomena in the resistance/strain response characteristics, which limits their application in practical engineering. In this work, carbon black (CB) and graphene (GR) were blended to modify silicone rubber (VMQ). GR and CB were modified with negative and cationic surfactants respectively. The electrostatic attraction between ions was used to generate synergistic effect, and the alternating distribution of CB and GR molecules was promoted by self-assembly. The conductive network structure is homogenized and stabilized, and the acromion phenomenon is eliminated to improve the stability of the conductive elastomer composite. By comparing the properties of single-doped CB/GR and non-self-assembled CB-GR/VMQ composites, it is found that the self-assembled composites have the lowest permeability threshold(0.49%), the highest resistance/strain response sensitivity(GFmax>8043.17), the largest strain sensing range(εmax>200%), the best signal stability, and no acromion phenomenon. In particular, it shows excellent resistance response signal stability at the end of 7000 cycle loading experiment. According to SEM characterization and seepage theory analysis, the uniform distribution of conductive nanoparticles and stable conductive network structure of self- assembled composite materials are the main reasons for their excellent resistance/strain response performance, and provide theoretical support for real-time strain monitoring of large deformation structures.