水性UV固化环氧丙烯酸树脂的制备及其在导电油墨的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(22008148)


Preparation of Water-Based UV-Curable Polyurethane Resin and Its Application in Conductive Inks
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    树脂作为导电油墨中导电剂的载体,对导电油墨的应用性能起到关键的作用。为了改善导电油墨的应用性能,首先以双酚A型环氧树脂E-51 与丙烯酸(AA)在四丁基溴化铵催化作用下制备出丙烯酸改性环氧树脂预聚物(EA),以异佛尔酮二异氰酸酯(IPDI)、聚己内酯二元醇(PCL-1000)、2, 2-二羟甲基丁酸(DMBA)和季戊四醇三丙烯酸酯(PETA)制备了半封端UV光固化聚氨酯预聚体(PUA),然后通过EA对PUA进行封端反应,制备了水性光固化树脂WPE。系统考查了n(NCO)/n(OH),w(PETA),DMBA和EA对树脂性能的影响。将该树脂作为黏结剂制备水性导电油墨,研究了光固化时间对油墨涂膜力学性能的影响。研究结果表明,当n(NCO)/n(OH)为1.6,DMBA用量为10%,EA用量低于8%,w(PETA)为8.51%,光引发剂含量为3%时,WPE-PETA凝胶含量为93.5%,乳液粒径为39.91 nm,乳液稳定性最佳,光固化速度最快,制备出的导电油墨具有最佳的物理力学性能。

    Abstract:

    As the carrier of conductive agent in conductive inks, resin plays a key role in the application performance of conductive ink. In order to improve the application performance of conductive inks, acrylic modified epoxy resin prepolymer (EA) was prepared with bisphenol A, epoxy resin E-51 and acrylic acid (AA), firstly. 2,2- Dihydroxymethylbutyric acid (DMBA) and pentaerythritol triacrylate (PETA) were used to prepare semi-capped UV light-curable polyurethane prepolymers (PUAs), and then PUA was endcapped by EA to prepare water- based light- curing resins WPE. The effects of n(NCO)/n(OH) value, w(PETA), DMBA, EA and initiator dosage on the properties of the resin were systematically investigated. The resin was used as binder to prepare water-based conductive ink, the effect of light curing time on the mechanical properties of the ink coating films were studied. The results show that when n(NCO)/n(OH) is 1.6, the DMBA content is 10%, the EA content is less than 8%, the w(PETA) is 8.51%, the photoinitiator content is 3%, the emulsion particle size is 39.91 nm, the final gel content of WPE- PETA is 93.5%, and the emulsion stability is the best, the light- curing speed reaches the fastest, and the prepared conductive ink has the best mechanical and physical properties.

    参考文献
    相似文献
    引证文献
引用本文

郭丽媛,罗 洋,王海花,李 鹏,张 康,赵华登.水性UV固化环氧丙烯酸树脂的制备及其在导电油墨的应用[J].高分子材料科学与工程,2025,41(4):22-33. Liyuan Guo, Yang Luo, Haihua Wang, Peng Li, Kang Zhang, Huadeng Zhao. Preparation of Water-Based UV-Curable Polyurethane Resin and Its Application in Conductive Inks[J]. Polymer Materials Science & Engineering,2025,41(4):22-33.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-07-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司