Abstract:Surface modification of wollastonite was carried out with stearic acid (SA), and the effects of different amounts of wollastonite before and after modification on the vulcanization and mechanical properties of butadiene styrene rubber (SBR) were investigated. The anti slip performance of modified wollastonite filled rubber was also tested. FT-IR and contact angle testing show that stearic acid reacts with hydroxyl groups on the surface of wollastonite, resulting in a significant increase in its hydrophobicity. The mechanical and vulcanization performance tests show that after modification with stearic acid, the mechanical properties of the composite material of wollastonite increase and the vulcanization rate becomes faster. The results of dynamic mechanics analysis (DMA) and anti slip performance testing show that the addition of modified wollastonite reduces the rolling resistance of the composite material, improves its anti slip performance, especially the anti oil slip performance. When the modified wollastonite content is 30 phr, the oil surface friction coefficient of the composite material is the highest, reaching 0.64, and the improvement is as high as 256% compared to the one without wollastonite added. SEM results show that the interface gap between unmodified wollastonite and rubber is clear, while the interface gap is blurred after modification, further indicating that wollastonite is an effective surface modifier that can improve the compatibility between wollastonite and rubber.