聚碳酸亚丙酯型水性聚氨酯丝网印刷油墨的制备
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation of Polypropylene Carbonate Type Waterborne Polyurethane Screen Printing Ink
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用以CO2为原料制备的聚碳酸亚丙酯二醇(PPCD)为软段、异佛尔酮二异氰酸酯(IPDI)等为硬段制备水性聚氨酯(WPU)乳液,再将WPU乳液与颜料、助剂等混合制备了系列聚碳酸亚丙酯型水性聚氨酯丝网印刷油墨。通过红外光谱、力学性能、热重分析、附着牢度等测试分析了样品的结构与性能。结果表明,当IPDI 中异氰酸酯基团和PPCD中羟基的摩尔比n(NCO):n(PPCD-OH)为4:1 时制备的样品WPU-2 综合性能最佳,拉伸强度为22.8 MPa,断裂伸长率为645%,24 h 吸水率为27.6%,在PET 薄膜上的附着牢度为100%。使用WPU-2 制备的水性聚氨酯油墨均具有优异性能,其中水性颜料质量分数为13.9%的丝印油墨样品Ink-3 综合性能最佳,其在PET薄膜上的附着牢度为100%,置于去离子水中24 h 不溶解,60°入射角光泽度为79GU,印刷品清晰且颜色鲜艳。

    Abstract:

    The polypropylene carbonate diol (PPCD) prepared with CO2 as raw material was used as soft section, and the isokone diisocyanate (IPDI) was used as hard section to prepare the waterborne polyurethane (WPU) emulsion, and then the WPU emulsion was mixed with pigments and additives to prepare a series of polypropylene carbonate waterborne polyurethane screen printing inks. The structure and properties of the samples were analyzed by FT-IR, mechanics, TG, adhesion fastness and other tests. The results show that when the isocyanate group of IPDI and the hydroxymolar ratio n(NCO): n(PPCD-OH) in PPCD is 4:1, the WPU-2 has the best comprehensive properties, with a tensile strength of 22.8 MPa, an elongation at break of 645%, a 24 h water absorption rate of 27.6%, and an adhesion fastness of 100% to PET film. The water-based polyurethane inks prepared with WPU-2 have excellent performance, among which the screen printing ink sample Ink-3 prepared with the water-based pigment mass fraction of 13.9% has the best comprehensive performance. Its adhesion fastness to PET film is 100%, it is insoluble when placed in deionized water for 24 h, the gloss of 60° angle of incidence is 79 GU, and the printed matter is clear and brightly colored.

    参考文献
    相似文献
    引证文献
引用本文

赵明明,钱鹏号,黄毅萍,熊潜生,鲍俊杰.聚碳酸亚丙酯型水性聚氨酯丝网印刷油墨的制备[J].高分子材料科学与工程,2025,41(4):105-113. Mingming Zhao, Penghao Qian, Yiping Huang, Qiansheng Xiong, Junjie Bao. Preparation of Polypropylene Carbonate Type Waterborne Polyurethane Screen Printing Ink[J]. Polymer Materials Science & Engineering,2025,41(4):105-113.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-07-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司