Abstract:Isoprenyl polyoxyethylene ether (TPEG), acrylic acid (AA), and silane coupling agent KH-570 were used as main raw materials to synthesize a series of silane- modified polycarboxylate superplasticizers (PCEs), which were then used as dispersing agents to prepare a series of modified ettringite (AFts) crystal nuclei. The synthesized silane- modified PCEs were characterized by gel permeation chromatography (GPC), infrared spectroscopy (IR), and proton nuclear magnetic resonance (1H-NMR). The results show that the synthesized silane-modified PCEs are in good structural agreement with the target chemical structure. The particle size, structure, and morphology of the AFts were characterized by dynamic light scattering (DLS), scanning electron microscopy (SEM), and X- ray diffraction (XRD). The results reveal that after adding the silane- modified PCEs, the morphology of the AFts crystal nuclei changes from fibrous to fine needle-like, with significantly reduced particle size and increased quantity. Studies on the cement hydration products, the results of thermal properties, morphology, and concrete compressive strength show that the AFts crystals modified with silane-modified PCEs accelerate the formation of CH and AFts crystals, promoting a closer bond between cement particles and reducing micro-cracks, which significantly improve the early compressive strength of concrete. In particular, the concrete containing AFt-4 shows the highest compressive strength, with the 1 d compressive strength increasing from 67.2 MPato 79.4 MPa, an improvement of 118.15%.