Abstract:In recent years, conductive hydrogels were widely applied in the fields such as flexible wearable devices, soft robots and bioelectrodes. However, complex and changing application environments place higher demands on conductive hydrogels in terms of electrochemical properties, mechanical properties, and biocompatibility. This paper presented a scheme for enhancing the mechanical and electrochemical properties of conductive hydrogels using biomass. Enhancement of the mechanical as well as electrochemical properties of hydrogels was achieved by introducing carboxymethyl cellulose (CMC) and two-dimensional transition metal conductive material, MXene nanosheets, into the polyacrylamide (PAM) network. The engineered PAM/CMC/MXene (PCM) hydrogels exhibit mechanical strength (tensile strength of 1.51 MPa, elongation at break of 1045%, toughness of 7.90 MJ/m3) as well as high conductivity (σ=0.31 S/m) and sensitivity (GF=4.20, 50%~350%). The incorporation of CMC was verified by the experimental results that it can effectively enhance the mechanical and electrochemical properties of conductive hydrogels, and the PCM hydrogel could be used as strain-induced flexible sensor substrate material to accurately detect specific human motions. This study opens up the prospect of sustainable and high-value utilization of natural bioresources, while providing new insights into the development of flexible electronic devices based on green biomass materials.