铝/聚氯乙烯贴合用反应型聚氨酯热熔胶的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北省技术创新专项(重大项目2016ACA166)


Preparation and Properties of Reactive Polyurethane Hot Melt Adhesive for Aluminum/Polyvinyl Chloride Bonding
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对用于铝与塑料复合的环氧型胶与溶剂型聚氨酯胶黏剂价格高、固化时间较长、含有有机溶剂及对人体和环境有危害等问题,文中以聚四氢呋喃二醇(PTMG)、聚己二酸己二醇酯二醇(PHA)和4, 4-二苯基甲烷二异氰酸酯(MDI)等原料通过无溶剂聚合法合成了一种铝/聚氯乙烯(PVC)贴合用反应型聚氨酯(PUR)热熔胶,调整PHA 和PTMG 的用量比,使胶黏剂分子结晶和极性随着分子链中酯键数量的变化而变化,实现了胶黏剂粘接性能的最优化。红外光谱表征证明了胶黏剂的成功制备。采用控制变量法确定了θ=80 ℃ ,t=2 h,R=2,反应物为MDI和n(PHA):n(PTMG)=4:6 为制备PUR热熔胶的反应条件与配方,对该配方制备的胶黏剂进行了粘接性能、热稳定性及流变性能分析。结果表明,该胶黏剂的铝/PVC初粘强度为18.6 N/25 mm,终粘强度为49.7 N/25 mm,具有很好的粘接性能;热重曲线表明该胶黏剂的初始分解温度为297 ℃,具有良好的耐热性;流变曲线表明,120 ℃时该胶黏剂的黏度随剪切时间的延长变化较小,在操作时间内(600 s)流变性能稳定,在施胶工艺中具有很好的应用前景。

    Abstract:

    Aiming at the problems of epoxy adhesives and solvent- based polyurethane adhesives used for composites of aluminum and plastics, such as high price, long curing time, containing organic solvents, and being harmful to the human body and environment. In this paper, a kind of reactive polyurethane (PUR) hot melt adhesive for aluminum/PVC bonding was synthesized by solventless polymerization using polytetrahydrofuranediol (PTMG), polyhexadiol adipate(PHA) and 4, 4-diphenylmethane diisocyanate (MDI). By adjusting the dosage ratio of PHA and PTMG, the molecular crystallization and polarity of the adhesive change with the change of the number of ester bonds in the molecular chain, so as to achieve the optimization of adhesive bonding performance. The successful preparation of the adhesive was proved by infrared spectrum characterization. Control variable method was used to determine θ=80 ℃, t=2 h, R=2, and the reactants were MDI and n(PHA):n(PTMG) =4:6 as reaction conditions and formulations for preparing PUR hot melt adhesive. The bonding properties, thermal stability and rheological properties of the adhesive prepared by the formula were analyzed. The results show that the initial adhesive strength of the adhesive is 18.6 N/25 mm, and the final adhesive strength is 49.7 N/25 mm, which have good bonding properties. The thermogravimetric curve shows that the initial decomposition temperature of the adhesive is 297 ℃, and it has good heat resistance. The rheological curve shows that the viscosity of the adhesive changes little with the extension of shear time at 120 ℃, and the rheological property is stable during the operation time (600 s), which has a good application prospect in the sizing process.

    参考文献
    相似文献
    引证文献
引用本文

刘亦曾,佘静丽,徐 微,李 勇,马宇彤,李盛彪.铝/聚氯乙烯贴合用反应型聚氨酯热熔胶的制备与性能[J].高分子材料科学与工程,2025,41(5):1-9. Yizeng Liu, Jingli She, Wei Xu, Yong Li, Yutong Ma, Shengbiao Li. Preparation and Properties of Reactive Polyurethane Hot Melt Adhesive for Aluminum/Polyvinyl Chloride Bonding[J]. Polymer Materials Science & Engineering,2025,41(5):1-9.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-08-31
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司