Abstract:Electrospun nanofiber membranes have been widely used in air filtration due to their high porosity, high specific surface area, and excellent permeability. For air filtration materials, achieving efficient and low resistance filtration is an urgent problem to be solved. In this study, PVDF- HFP was used as raw material to prepare nanofiber membranes with a 3D micro/nano-bead structure by electrospinning and electrostatic spraying. The effects of electrostatic spraying time and SiO2 content on the structure and performance of the nanofiber membranes were investigated. With the increase of electrostatic spraying time, the pore size and air permeability decrease and the wetting resistance is improved. When the electrostatic spraying time is 30 min, the air filtration performance of the obtained membrane is optimal. Additionally, with the increase of SiO2 content, the pore size and air permeability decrease and the wetting resistance is improved. When the SiO2 mass fraction is 2%, the air filtration performance of obtained membranes is optimal. In conclusion, when the electrostatic spray coating time is 30 min and the SiO2 mass fraction is 2%, the resulting nanofiber membrane can achieve high efficiency and low resistance air filtration, with a filtration efficiency of up to 99.58% and a pressure drop reduced to 70.60 Pa.