海藻酸钠/四硼酸钠水溶液的流变性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Rheological Properties of Sodium Alginate/Sodium Tetraborate Aqueous Solution
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在海藻酸钠(SA)/四硼酸钠(STB)水溶液中,STB会影响SA分子间及分子内化学键的形成,进而改变其溶液的流变响应。为探究SA/STB溶液的流变性与可纺性变化规律,研究了STB浓度、体系温度、SA单元组成等因素对溶液流变行为的影响。结果表明,SA与STB发生了共价交联,SA/STB溶液为假塑性流体。表观黏度、结构黏度指数、黏流活化能和动态模量随温度升高而减小,随STB浓度增大而增大,非牛顿指数则相反。高M/G比值的SA/STB溶液可纺性较好、对温度更敏感,升温和提高剪切速率可改善低M/G比值溶液的流动性,加工成型时可按实际情况选择合适的交联剂浓度和温度条件。

    Abstract:

    In sodium alginate (SA)/sodium tetraborate (STB) aqueous solution, STB can affect the formation of inter and intramolecular chemical bonds of SA, which in turn changes the rheological response of its solution. In order to investigate the changing rules of rheology and spinnability of SA/STB solutions, the effects of STB concentration, system temperature, SA unit composition and other factors on the rheological behavior of their solutions were investigated. The results show that covalent cross-linking occurs between SA and STB, and the SA/STB solution is a pseudoplastic fluid. The apparent viscosity, structural viscosity index, viscous flow activation energy and dynamic modulus decrease with increasing temperature and increase with increasing STB concentration, while the opposite is true for the non-Newtonian index. The SA/STB solution with a high M/G ratio has better spinnability and is more sensitive to temperature. Increasing temperature and shear rate can improve the fluidity of solutions with a low M/G ratio, and the appropriate cross-linking concentration and temperature control interval can be selected according to the actual situation when processing and molding.

    参考文献
    相似文献
    引证文献
引用本文

朱 雷,程 敏,李晓俊,程春祖,徐纪刚.海藻酸钠/四硼酸钠水溶液的流变性能[J].高分子材料科学与工程,2025,41(5):104-112. Lei Zhu, Min Cheng, Xiaojun Li, Chunzu Cheng, Jigang Xu. Rheological Properties of Sodium Alginate/Sodium Tetraborate Aqueous Solution[J]. Polymer Materials Science & Engineering,2025,41(5):104-112.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-08-31
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司