流体辅助注射成型及其衍生工艺
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52273033,52163006);江西省自然科学基金重点项目(20232ACB204004);江西省重点研发计划“揭榜挂帅”项目(20223BBE51012)


Fluid-Assisted Injection Molding and Its Derivatives
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    流体辅助注射成型工艺(FAIM)是一项利用压力流体完成熔体充填、保压来获得复杂中空制件的聚合物一次成型工艺。文中简要概述了近年来FAIM工艺的国内外研究进展,涵盖了气体辅助注射成型、水辅助注射成型等常规工艺,以及硅油辅助注射成型、液气辅助注射成型、液态二氧化碳辅助注射成型、流体驱动弹头辅助注射成型、流体辅助共注射成型、流体驱动弹头辅助共注射成型等衍生工艺。首先介绍了不同流体的穿透过程并进行了对比,进而阐述了不同工艺成型制件结晶形态及纤维取向的影响机制及差别,最后通过数值模拟进一步分析了不同工艺的成型机理差异。另外,在此基础上展望了FAIM工艺的未来研究方向。

    Abstract:

    Fluid- assisted injection molding (FAIM) process is a polymer molding process that utilizes pressurized fluids to complete melt filling and pressure maintenance, enabling the one-time formation of complex hollow plastic parts. This article briefly summarized the research progress of FAIM processes both domestically and internationally in recent years, including conventional techniques such as gas- assisted injection molding (GAIM) and water-assisted injection molding (WAIM), as well as derivative processes like oil-assisted injection molding, liquid gas assisted injection molding, liquid carbon dioxide- assisted injection molding (LCO2- AIM), fluid- projectile assisted injection molding (FPAIM), fluid- assisted co- injection molding (FACIM), and fluid- projectile assisted co- injection molding (FPACIM). First, the penetration processes of different fluids were introduced and compared. Subsequently, the mechanisms and differences in the crystallization morphology and fiber orientation of parts formed by various processes were elaborated. Finally, numerical simulation was used to further analyze the differences in molding mechanisms among different processes. Additionally, based on this overview, future research directions for the FAIM process were prospected.

    参考文献
    相似文献
    引证文献
引用本文

杨 帆,匡唐清,柳和生,梁健康,金廷翁,彭 杰.流体辅助注射成型及其衍生工艺[J].高分子材料科学与工程,2025,41(5):159-168. Fan Yang, Tangqing Kuang, Hesheng Liu, Jiankang Liang, Tingweng Jin, Jie Peng. Fluid-Assisted Injection Molding and Its Derivatives[J]. Polymer Materials Science & Engineering,2025,41(5):159-168.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-08-31
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司