一种生物基聚碳酸酯及梳状材料的构筑
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52173004);河北省自然科学基金资助项目(E2022202015)


Construction of a Bio-Based Polycarbonate and Comb-Like Material
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以10-十一烯酸与五氟苯酚为原料,先后进行酯化反应和烯烃环氧化反应制备了一种生物基环氧化合物,即氧化10-十一烯酸五氟苯酚酯(PFPUO)。继而在锌钴双金属氰配合物(DMC)催化下将PFPUO与CO2 进行开环共聚,得到了聚碳酸酯PFPUC。将此侧链上带有五氟苯酯结构的聚合物与聚乙二醇单甲醚(mPEG)通过酯交换反应进行功能化,制备了梳状材料PFPUC-g-mPEG。研究表明,mPEG-2000的引入可以使烷基侧链部分结晶,其熔融温度(Tm)和热焓值(?Hm)分别为52 ℃和38.9 J/g,具有较好的热性能。

    Abstract:

    A bio-based epoxy monomer, pentafluorophenol undecylenate (PFPUO) was synthesized simply and efficiently via esterification and epoxidation, and the effects of temperature, time, solvent dosage and catalyst concentration on the double bond epoxidation efficiency were investigated. Then polycarbonate PFPUC was prepared by ring-opening copolymerization of PFPUO and CO2 catalyzed with Zn-Co bimetallic cyanide complex. The transesterification of the binary polymer bearing pentafluorophenyl ester structure with polyethylene glycol monomethyl ether (mPEG) occurred to produce comb-like polymer PFPUC-g-mPEG. It is shown that the alkyl side chain can be partially crystallized by the introduction of mPEG-2000, and its melting temperature (Tm) and heat enthalpy (?Hm) are 52 ℃ and 38.9 J/g, respectively, which possess good thermal performance.

    参考文献
    相似文献
    引证文献
引用本文

海梦娅,段中余,刘宾元.一种生物基聚碳酸酯及梳状材料的构筑[J].高分子材料科学与工程,2025,41(6):1-6. Mengya Hai, Zhongyu Duan, Binyuan Liu. Construction of a Bio-Based Polycarbonate and Comb-Like Material[J]. Polymer Materials Science & Engineering,2025,41(6):1-6.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-09-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司