Abstract:Lithium-ion batteries have received widespread attention due to their advantages such as high energy density. The separator, as an important component to prevent short-circuiting and ensure battery safety, has always been one of the hotspots for developing high-performance lithium-ion battery. In this work, a novel polyamide acid (PAA) material containing three structural units of pyromellitic dianhydride (PMDA), 4,4'- oxydianiline (ODA), and polyetheramine (D400) was synthesized through two- step polycondensation reaction. After preparing nanofiber membranes by electrospinning, polyethyleneimine (PEI) was introduced for surface modification, thus a novel separator with enhanced hydrogen bonding was prepared. The results show that, compared with PE separators, PAA separators exhibit excellent thermal stability, electrolyte wettability, and electrochemical performance. The POD-PEI separator with enhanced hydrogen bonding shows the highest ionic conductivity (4.08 mS/cm), rate performance, and charge-discharge cycling performance. The battery assembled with POD-PEI separator shows specific capacity retention rates of 77.2% at a discharge current density of 3.0 C, and specific capacity retention rates of 98.5% after 100 cycles of a charge-discharge current density of 0.5 C/0.5 C. Therefore, an excellent separator for high- performance lithium- ion batteries was successfully prepared.