Abstract:In this study, the environmental friendly plasticizers of trimellitic acid tris (glycol ether) esters were synthesized by direct esterification using trimellitic anhydride (TMA) and glycol ether as raw materials; the product structure was determined by 1H-NMR and FT-IR, and the product should be applied to the study of polyvinyl chloride (PVC) plasticizing properties. The results show that the elongation at break of PVC products (PVC/TTEGM) plasticized with tris (tetraethylene glycol ether) trimellitate (TTEGM) is increased by 86.0%, the Tg is decreased by 23.8 ℃, the initial decomposition temperature (T5% ) is increased by 21.2 ℃, and the mass loss rate of the product is decreased by 13.6% in n-hexane, and decreased by 2.9% in the volatility test at 70 °C. PVC/ TTEGM shows an improvement of 62.0% in elongation at break, a decrease of 8.2 °C in Tg , and an increase of 11.6 °C in T5% compared to the PVC product plasticized with trimellitic acid trioctyl ester (TOTM) (PVC/TOTM), the mass loss rate in n-hexane is decreased by 8.5%, and in the volatility test at 70 °C, the mass loss rate is decreased by 0.85%, showing that the new trimellitic acid tris (glycol ether) ester plasticizer has the potential to replace the toxic plasticizer dioctyl phthalate (DOP) and the commercially available plasticizer TOTM.