Abstract:Two-dimensional transition metal carbon/nitride (MXene) nanosheets with single layer structure and excellent organic solvent dispersibility were prepared by updated organic solvent-assisted intercalation (OAIC) method. Polylactide (PLA) composite films with different MXene content were prepared by solution casting method. Then, the effects of annealing on the structure and properties of the MXene/PLA composites were investigated. Results show that annealing does not change the spherulitic structure of PLA. The annealing process decreases the interplanar crystal spacing of MXene and makes its arrangement more consistent by increasing the mobility of macromolecule chains of PLA. The content of MXene is the key factor that determines both Tcc and crystallization rate of the resultant PLA composites. When MXene was used to modify PLA, 3.5 phr is its threshold concentration. Furthermore, annealing improves the crystallization rate of PLA and refines its grains via reducing its cold crystallization temperature, and enables the composite crystallization thinning phenomenon. The tensile strength of the annealed MXene3.5PLA is enhanced by 9.2 folds, compared with its unannealed counterpart. Also, its fracture mode changes from ductile fracture before annealing to brittle mode.