模压成型关键工艺参数对连续碳纤维增强聚苯硫醚复合材料成型质量与力学性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

上海市2022年度“科技创新行动计划”高新技术领域项目(22511102400)


Influence of Key Process Parameters on the Molding Quality and Mechanical Properties of Continuous Carbon Fiber-Reinforced Polyphenylene Sulfide Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中以碳纤维增强聚苯硫醚单向预浸带(CF/PPS)为研究对象,对其低成本模压成型工艺进行了初步探索,通过模压成型制备了CF/PPS复合材料,采用金相显微镜分析和力学性能测试探究了不同成型工艺对准各向同性复合材料层合板成型质量及力学性能的影响。结果表明,当成型温度为320 ℃,成型压力为0.9 MPa,保压时间为15 min时,CF/PPS层合板质量缺陷最少,力学性能优异。从机理上分析了成型工艺对纤维增强复合材料结构的影响,进而对性能的影响。结果表明,较低的成型温度、成型压力和保压时间使得树脂在Z轴方向上流动不充分,导致层间固结程度低;而过高的成型温度和成型压力会加强树脂的横向流,导致出现了纤维屈曲、相邻层间纤维夹角变化等现象,对CF/PPS层合板的成型质量产生不利影响。研究结果可为CF/PPS热塑性复合材料应用于航空结构的材料和工艺选择提供基础数据和技术参考。

    Abstract:

    Carbon fiber reinforced polyphenylene sulfide (CF/PPS) unidirectional tape was selected as research subject to investigate its cost-effective molding process. The CF/PPS composite material was fabricated through die-molding techniques. Through metallographic analysis and mechanical property testing, the influence of various molding processes on the quality and mechanical properties of isotropic composite laminates was systematically explored. The results indicate that when the molding temperature is 320 °C, the molding pressure is 0.9 MPa, and the holding time is 15 min, the CF/PPS laminates exhibit minimal quality defects and superior mechanical properties. Additionally, the impact of the molding process on the structure and properties of fiber- reinforced composites was analyzed from a mechanistic perspective. It is found that low molding temperatures, pressures, and holding time result in insufficient resin flow in the Z-axis direction, leading to poor interlayer consolidation. Conversely, high molding temperatures and pressures enhance the transverse flow of resin, causing fiber buckling and changes in fiber angles between adjacent layers, which adversely affect the molding quality of CF/PPS laminates. These findings provide fundamental data and technical references for material and process selection in the application of CF/PPS thermoplastic composites in aerostructures.

    参考文献
    相似文献
    引证文献
引用本文

林鸿宇,杨 洋 ,王孝军,杨 杰.模压成型关键工艺参数对连续碳纤维增强聚苯硫醚复合材料成型质量与力学性能的影响[J].高分子材料科学与工程,2025,41(6):105-115. Hongyu Lin, Yang Yang, Xiaojun Wang, Jie Yang. Influence of Key Process Parameters on the Molding Quality and Mechanical Properties of Continuous Carbon Fiber-Reinforced Polyphenylene Sulfide Composites[J]. Polymer Materials Science & Engineering,2025,41(6):105-115.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-09-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司