Abstract:To enhance the piezoelectric properties of polyacrylonitrile (PAN) fiber membranes, PAN/TBAHP/ZIF-8 nanofiber membranes were fabricated via electrospinning by incorporating organic branched salt (TBAHP) and zeolite imidazolate framework material (ZIF-8) into PAN. The effect of ZIF-8 content on the piezoelectric properties of electrospinning PAN fiber membranes was investigated. The surface morphology, conformation, and piezoelectric characteristics of PAN/TBAHP/ZIF- 8 fiber membranes were analyzed and evaluated through scanning electron microscopy, infrared spectroscopy, X- ray diffraction, and piezoelectric testing. The findings reveal that the addition of TBAHP facilitates the mechanical stretching of fibers under an electric field, leading to reduced fiber diameter and increased content of planar sawtooth conformation, thereby influencing the piezoelectric properties of PAN nanofiber membranes. Incorporating ZIF-8 into PAN/TBAHP results in enhanced interfacial coupling between ZIF-8 and PAN, leading to further augmentation of planar sawtooth conformation content and reduction in interfacial spacing. At a ZIF-8 mass fraction of 1.2%, the planar serration conformation content is the highest, the crystal plane spacing is the smallest, the short-circuit current reaches 2.6 μA, and the peak voltage (Vp-p) output reaches 15.5 V, marking a 226.2% and 134.8% increase over PAN/TBAHP- NM, respectively. The electrical output surpasses that of pure PAN-NM by 465.2% and 361.3%, respectively.