界面增容剂反应基元含量对聚乳酸/生物基尼龙11共混体系结构及性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51903002);安徽省科技重大专项(2021e03020008,202103a05020031);安徽省自然科学基金优青项目(2308085Y34);安徽省高校杰出青年科研项目(2022AH020024);安徽建筑大学博士启动基金(2023QDZ23);安徽高校协同创新项目(GXXT -2023-098,GXXT-2023-040)


Effect of Interface Compatibilizer Reaction Element Content on Structure and Properties of Polylactic Acid/Bio-Based Nylon 11 Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    设计合成了环氧值分别为10%,20%,30%,40%和50%的甲基丙烯酸缩水甘油酯基扩链剂(SMG-EX),并将其引入聚乳酸/生物基尼龙11(PLA/Bio-PA11)共混体系中,研究了环氧值对PLA/Bio-PA11熔融共混过程中的熔体状态、共混物聚集态结构、热力学性能及力学性能的影响。结果表明,SMG-EX能够与PLA末端羧基、羟基,以及Bio-PA11的端羧基和氨基反应,从而增强PLA与Bio-PA11分子链间相互作用,在共混物界面和基体中形成微交联结构,并诱导共混物的相形态从“海岛结构”转变为“类双连续结构”,改善两相相容性,提高共混物力学性能。当SMG-EX中环氧基团含量超过40%时,共混物基体内部会因为环氧基团含量较高导致局部界面交联密度过高,材料的力学性能降低。当添加环氧值为40%的SMG-E40时,材料的拉伸强度为54.9 MPa,断裂伸长率达到232.1%,力学性能显著提升。

    Abstract:

    Glycidyl methacrylate- based chain extenders (SMG-EX) with epoxy values of 10%, 20%, 30%, 40% and 50% respectively were designed and synthesized, and introduced into the polylactic acid/bio-based nylon 11 (PLA/Bio- PA11) blend system. The effects of epoxy value on the melt state, aggregate state structure, thermodynamic properties, and mechanical properties of PLA/Bio- PA11 during the melt blending process were investigated. The results show that SMG-EX is able to react with the terminal carboxyl and hydroxyl groups of PLA, as well as with the terminal carboxyl and amino groups of Bio- PA11, thereby enhancing the interaction between the molecular chains of PLA and Bio-PA11, leading to the formation of micro-crosslinking structure at the interface of the blend and in the matrix, and induce the phase morphology of the blend to change from‘island structure’to‘bicontinuous structure’’, thus the compatibility of the two phases and the mechanical properties of the blend were improved. When the content of epoxy groups in SMG- EX is more than 40% , due to the high content of epoxy groups within the matrix of the blend, the local interface crosslinking density would be too high, reducing the mechanical properties of the material. The addition of SMG-E40 with an epoxy value of 40% could lead to a notable improvement of the mechanical properties of the materials, the tensile strength of the material is 54.9 MPa, while the elongation at break reaches 232.1%.

    参考文献
    相似文献
    引证文献
引用本文

王 平,董 事,刘佳佳,周意杨,刘文秀,杨 利,曹 田,朱露芳.界面增容剂反应基元含量对聚乳酸/生物基尼龙11共混体系结构及性能的影响[J].高分子材料科学与工程,2025,41(7):17-24. Ping Wang, Shi Dong, Jiajia Liu, Yiyang Zhou, Wenxiu Liu, Li Yang, Tian Cao, Lufang Zhu. Effect of Interface Compatibilizer Reaction Element Content on Structure and Properties of Polylactic Acid/Bio-Based Nylon 11 Blends[J]. Polymer Materials Science & Engineering,2025,41(7):17-24.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-10-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司