长支链聚乳酸/碳纳米管复合材料应力传导网络的构筑及其对性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

重点实验室开放课题(20202303BC530)


Construction of Stress-Conducting Networks in Long-Branched Polylactide/Carbon Nanotube Composites and Their Effect on Properties
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了进一步提高材料力学强度适应更丰富的应用场景,采用线型PLA、扩链剂与羧基化碳纳米管(CNTs)通过双螺杆反应挤出的方法,在长支链聚乳酸(LCBPLA)前驱体网络中引入了CNTs,对CNTs的分散、前驱体网络的形貌、结晶性能、力学性能和增韧机理进行了研究。结果表明,由于CNTs与LCBPLA基体有较强的界面作用,CNTs质量分数小于0.3%时能在挤出样品中实现良好分散,且发挥一定的促进结晶的作用,使得屈服强度略有提升,但断裂伸长率下降。多级拉伸挤出系统能够促进CNTs分散、取向与均匀分布,后拉伸能有效固定这种取向结构,得到一种有序的“中间相”网络,使体系结晶度增加到5%左右。引入冰水冷却使体系内的“中间相”网络得到增强,形成均匀取向的晶体网络,体系结晶度提升至18%,结晶温度增加到115 °C。CNTs的引入、多级拉伸挤出、后拉伸和冰水冷却共同作用,在LCBPLA/CNTs体系中构筑了密实均匀的前驱体网络,在材料内部实现了良好的应力传导,从而使材料强度提高了8%左右,断裂伸长率最高能达173%。

    Abstract:

    By introducing long branched chains into polylactic acid (PLA) to form a high- density chain entanglement network, a dense and uniform stress conduction network can be formed. Utilizing chain entanglement improve the stress response of PLA molecular chains under external forces, which can achieve significant toughening effect without destroying the intrinsic strength of the material. To further improve the mechanical strength of the material to adapt to wide range of application areas, carbon nanotubes (CNTs) were introduced into the long branched poly(lactic acid) (LCBPLA) network precursor by reactive extrusion of linear PLA, chain extender and CNTs. The dispersion of the CNTs, morphology of the precursor network, crystalline properties, mechanical properties and the toughening mechanism were investigated. The results show that CNTs can be well dispersed in the LCBPLA extruded samples, and the multi- stage stretching can further promote orientation and uniform distribution of CNTs. The addition of CNTs in the LCBPLA/CNTs system significantly improves the crystallinity and orientation of LCBPLA, as well as the denseness and homogeneity of the precursor network structure. The introduction of CNTs increases the strength of the material by about 8%, and the elongation at break can reach up to 173%.

    参考文献
    相似文献
    引证文献
引用本文

吉笑盈,廖 雪,周 婷,郭宇航,彭爽娟,邱诗蕊,李东亮,雷金山,吴 宏.长支链聚乳酸/碳纳米管复合材料应力传导网络的构筑及其对性能的影响[J].高分子材料科学与工程,2025,41(7):71-83. Xiaoying Ji, Xue Liao, Ting Zhou, Yuhang Guo, Shuangjuan Peng, Shirui Qiu, Dongliang Li, Jinshan Lei, Hong Wu. Construction of Stress-Conducting Networks in Long-Branched Polylactide/Carbon Nanotube Composites and Their Effect on Properties[J]. Polymer Materials Science & Engineering,2025,41(7):71-83.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-10-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司