Abstract:The accelerated photo-aging behavior and mechanism of ethylene-octene copolymers (EOCs) with different copolymer monomer contents and low- density polyethylene (LDPE) were studied. Through the characterization and analysis of gel content, mechanical properties, thermal stability, microscopic morphology, rheological properties, crystal morphology, differential scanning calorimetry and functional group changes, the influence of copolymer monomer content on the photo- aging behavior of EOCs was revealed. The results of scanning electron microscopy (SEM) indicate that EOCs with high copolymer monomer content are prone to crack formation in the later stage of aging. The gel content, thermogravimetric analysis (TGA) and rheological results show that the higher the copolymer monomer content is, the stronger the ability of photo-crosslinking and chain scission degradation during accelerated photo-aging are; LDPE is mainly cross-linked during aging, while EOCs are mainly chain scission in the later stage of aging. The mechanical property results indicate that the mechanical strength of all EOC samples decreases with the increase of irradiation time. The results of X-ray diffraction (XRD) and differential scanning calorimetry (DSC) show that with the increase of copolymer monomer content, the crystal structure changes from folded lamellar to bundle-like; the bundle-like crystals in EOC2 and EOC3 samples with high copolymer monomer content could stably exist during aging. The results of attenuated total reflection Fourier transform infrared spectroscopy (ATR- FTIR) indicate that the photo- degradation mechanisms of all samples are similar, mainly with carbonyl and a small amount of vinyl as degradation products; however, EOC2 and EOC3 samples with high copolymer monomer content produce more carbon-carbon double bond structures in the early stage of aging, and the double bonds transform into ketones, esters, aldehydes and other degradation products in the later stage of aging.