Abstract:Currently, the commercial polyolefin separators suffer from deficiencies such as inadequate electrolyte affinity and poor thermal stability, resulting in the lack of charge-discharge performance and safety of assembled batteries. To enhance its electrolyte affinity and thermal stability, calcium carbonate nano particles were modified onto the surface of the polypropylene separator using polyvinyl alcohol as binder. The surface morphology, electrolyte uptake and thermal stability of the modified separators were characterized, and their electrochemical performance was evaluated. The results indicate that the porosity of the modified separator with 1.5% calcium carbonate can reach 46.47% ± 0.42% , while the electrolyte uptake increases to 168.03% ± 3.46%, thereby improving electrolyte affinity of the modified separator. At 170 ℃ , the thermal shrinkage rate of the modified separator is 18.59%±4.12%, with an increased tensile strength of about 169 MPa, and the mechanical properties and thermal stability of the separator are improved. Compared with the original separator, the ionic conductivity of the modified separators increases from 0.50 mS/cm to 0.78 mS/cm, and the specific discharge capacity could be maintained at 84.10% after 500 charge and discharge cycles, remaining more stable during the charge and discharge cycle.