Abstract:Poly(L-lactide-co-trimethylene carbonate) (P(LLA-TMC)) and polylactic acid (PLA) were blended with cetyltrimethylammonium bromide (CTAB) modified laponite(O-laponite), and P(LLA-TMC)/PLA/O-laponite composite films were prepared by solution casting method. The effects of different contents of O-laponite on the structure, morphology and properties of P(LLA-TMC)/PLA blends were studied. The results show that the elastic modulus and tensile strength of P(LLA-TMC)/PLA (90/10)increase with the increase of O-laponite content, and the toughening effect is more obvious with the increase of PLA content in the composite film. At the same time, the water vapor barrier, thermal stability, degradation rate and interface compatibility of the composite film are improved. The water vapor transmittance of the composite films decreases first and then increases with the increase of O-Laponite content. When the content of O-laponite in P(LLA-TMC)/PLA (90/10)increases from 0% to 1.5%, Td5% is increased by 11.5 °C and Tmax is increased by 22.1 °C, and accelerate the degradation rate of the composite film under alkaline conditions, the degradation rate is increased by about 66.66%.