高弹态强制流动加工制备环烯烃聚合物/氮化硼纳米片导热复合材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52473043)


Preparation of Cyclic Olefin Polymer/Boron Nitride Nanosheet Thermally Conductive Composites by High Elastic State Forced Flow Processing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    环烯烃聚合物(COP)是一种具有低介电性和低水汽透过性的非晶态聚合物,但是较低的本征热导率限制了其在电子功能材料领域的应用。文中采用高弹态强制流动加工制备 COP/氮化硼纳米片(COP/BNNS)导热复合材料,研究了加工循环次数对复合材料形态结构和性能的影响,实现了氮化硼(BN)在 COP 基体中的原位剥离,并在 COP 基体中构筑了沿面内取向的 BNNS 导热网络,明显提高了复合材料的面内热导率。研究表明,在质量分数 20%BN 含量下,经6 次强制流动加工循环后,原位剥离得到的 BNNS 具有最大的径厚比(31.9)和较高的面内取向度,复合材料面内热导率为 2.26 W/(m·K),相较直接共混提升了 25%;同时,复合材料的拉伸强度为 35.8 MPa,弹性模量为 1740 MPa,相比直接共混分别提升了约 17%和 20.8%;此外,复合材料保持了优异的介电性能(介电常数低至 2.3,介电损耗低至 0.0004@1 MHz),且水汽透过率从 0.0309 g/(m2·24 h)降低到 0.0288 g/(m2·24 h)。该研究为聚合物/BNNS 导热复合材料的制备与高性能化提供了一种简单高效的策略。

    Abstract:

    Cycloolefin polymer (COP) is an amorphous polymer, which has low dielectricity and low hygroscopicity. However, its low intrinsic thermal conductivity limits its application in electronic functional materials. In this study, cyclic olefin polymer/boron nitride nanosheets (COP/BNNS) thermally conductive composites were prepared by high-elasticity forced-flow processing. The effects of different processing cycles on the morphology and properties of the composites were investigated. In- situ exfoliation of boron nitride (BN) in the COP matrix was achieved. A thermally conductive network of BNNS with in-plane orientation was established in the COP matrix, leading to a notable enhancement in the in-plane thermal conductivity of the composites. At 20%BN content, six forced- flow processing cycles were performed. The BNNS exhibits the highest aspect ratio (31.9)and strong in- plane orientation. The in-plane thermal conductivity of the composite achieves 2.26 W/(m · K), representing a 25% increase compared to direct blending method. Meanwhile, the composite exhibits a tensile strength of 35.8 MPa and a elastic modulus of 1740 MPa, representing approximately 17%and 20.8%improvements compared to direct blending, respectively. And the composites retain excellent dielectric properties, with a dielectric constant as low as 2.3,and a dielectric loss as low as 0.0004@ 1 MHz. Additionally, the water vapor permeability decreases from 0.0309 g/m2 · 24 hto 0.0288 g/m2 · 24 h. This research offers a straightforward and effective approach for producing high-performance COP/BNNS thermally conductive composites.

    参考文献
    相似文献
    引证文献
引用本文

郑 义,吴 宏,郭少云.高弹态强制流动加工制备环烯烃聚合物/氮化硼纳米片导热复合材料[J].高分子材料科学与工程,2025,41(8):53-62. Yi Zheng, Hong Wu, Shaoyun Guo. Preparation of Cyclic Olefin Polymer/Boron Nitride Nanosheet Thermally Conductive Composites by High Elastic State Forced Flow Processing[J]. Polymer Materials Science & Engineering,2025,41(8):53-62.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-12-05
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司