共混改性聚丙烯电缆绝缘料的直流电气性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国南方电网有限责任公司科技项目(GDKJXM20222136)


Direct Current Electrical Characteristics of Blended Modification Insulation Materials for Polypropylene Cables
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚丙烯因为具有低密度、高强度和高绝缘性能等特点,近年来作为绿色可回收电缆绝缘材料得到广泛的应用研究。为了探讨聚丙烯材料在高压直流电缆领域的应用潜力,文中以共混改性聚丙烯绝缘料为研究对象,研究了不同聚丙烯树脂(iPP1,iPP2)与弹性体形成的复合共混体系(PPB1,PPB2)的聚集态结构对其直流电气性能的影响。结果表明,与 PPB2 相比,PPB1 的弹性体较小且分布较为均匀,结晶度较高,介电常数的温度依赖性较小,即 PPB1 的相态结构随温度的变化更稳定。共混改性后,由于 PPB1 的界面稳定性高于 PPB2,其直流电气性能更好。具体表现为,PPB1 在高场下的电导率较低且温度稳定性较高;在相同的直流电场作用下,PPB1 和 PPB2 的空间电荷注入场强分别为 22.13 kV/mm 和 19.04 kV/mm;PPB1 空间电荷积累较少,在整个绝缘厚度内的电场分布更为稳定;PPB1 的直流击穿强度高于PPB2,且 90 ℃时,PPB1 和 PPB2 的击穿场强分别下降了 40.1%和 43.2%。

    Abstract:

    Polypropylene (PP) has been widely used as green recyclable cable insulation material in recent years because of its low density, high strength and high insulation performance. In order to explore the application potential of PP material in the field of high- voltage direct current (HVDC) cable insulation, the influence of the composite blended system (PPB1 and PPB2)on the direct current (DC) electrical characteristics formed with different PP resin (iPP1,iPP2)and elastomers was studied. The results show that PPB1 has higher degree of crystallization, smaller elastomers size which are more uniformly distributed and lower dielectric constant compared with PPB2,which suggests that the phase structure of PPB1 is more stable with the change of temperature. DC electrical performance of PPB1 is also better due to the higher interfacial stability of PPB1 than that of PPB2.PPB1 has lower conductivity and higher temperature stability in high electrical field. In the same DC electrical field, the space charge injection field strengths of PPB1 and PPB2 are 22.13 kV/mm and 19.04 kV/mm, respectively. So the spatial charge is accumulated less in PPB1 and the electric field distribution is more stable throughout the insulation thickness. The DC breakdown strength (E0)of PPB1 is also higher than that of PPB2,and E0 of PPB1 and PPB2 is decreased by 40.1%and 43.2%respectively at 90 ℃.

    参考文献
    相似文献
    引证文献
引用本文

陈珂馨,王 照,徐 曼,侯 帅,展云鹏,傅明利,廖雁群.共混改性聚丙烯电缆绝缘料的直流电气性能[J].高分子材料科学与工程,2025,41(8):71-83. Kexin Chen, Zhao Wang, Man Xu, Shuai Hou, Yunpeng Zhan, Mingli Fu, Yanqun Liao. Direct Current Electrical Characteristics of Blended Modification Insulation Materials for Polypropylene Cables[J]. Polymer Materials Science & Engineering,2025,41(8):71-83.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2025-12-05
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司