Abstract:Surface silanized wollastonite (KH-W) was obtained by treating wollastonite with silane coupling agent KH570 first. Then, wollastonite coated with polymethyl methacrylate (PMMA-W) was obtained through soap-free emulsion polymerization. Finally, modified wollastonite (PA-W) with β-nucleating effect was obtained by treating with pimelic acid. Using the above modified wollastonite as filler and maleic anhydride (MA) grafted polyolefin elastomer (POE-g-MA) as compatibilizer, the polypropylene/wollastonite composites were prepared by melt extrusion, and their structure and properties were studied. The results show that the addition of POE-g-MA improves the compatibility between wollastonite and polypropylene matrix, and the interaction between them is further enhanced after wollastonite is coated and modified with PMMA. PA-W has a strong β-nucleation effect, and the notched impact strength of its filled polypropylene composite is the highest, reaching (32.76±1.53) kJ/ m2, which is about 7 times that of pure PP. In addition, compared with pure PP, the polypropylene composites filled with PMMA-W and PA-W have higher storage modulus, melt strength and thermal stability.