Abstract:Polymer radiative cooling coating materials are susceptible to the external dust, acid rain, chemicals, ultraviolet irradiation effects during their service time, resulting in a significantly reduction in radiative cooling capacity. In this work, hollow glass microsphere (HGM) was selected as functional fillers, and introduced into polydimethylsiloxane (PDMS) matrix to prepare silicone radiative cooling coating (PDMS-HGM). The microstructure, hydrophobic, self-cleaning, optical, and outdoor durable radiative cooling properties of the coating were investigated. The results show that the HGM filler can be well dispersed in the PDMS matrix when the mass fraction is 30%, resulting in uniform and dense two-phase structure. In comparison with PDMS, the static water contact angle of PDMS-HGM30 increases from 116° to 142°, and the relevant sliding angle decreases from 21° to 12°, suggesting the improvement of hydrophobicity and self-cleaning. The solar reflectance and infrared emissivity at the atmospheric transparent window of PDMS-HGM30 composite coating reach 88.2% and 95.0%, respectively, and the sub-ambient temperature is 8.1 ℃. After the treatment of surface contaminant rinsing, 5% acid and alkali soaking, ultraviolet irradiation, etc., the radiative cooling capacity of the PDMS-HGM30 coating still maintains above 91%, indicating good outdoor durable radiative cooling performance.