含甲基丙烯酸羟乙酯的聚对羟基苯乙烯型光刻成膜树脂的合成及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川省科技厅2022年国际科技创新合作项目(2022YFH0085)


Synthesis and Properties of Poly(4-hydroxystyrene)-Type Resist Polymers with Hydroxyethyl Methacrylate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    叔丁氧羰基保护的聚对羟基苯乙烯(PHS)因其良好的深紫外透过性、碱溶性和优异的抗干刻蚀能力, 广泛应用于 248 nm 光刻胶中。 然而, 其较低的玻璃化转变温度和较差的成膜性极大限制了光刻工艺窗口和光刻性能。 文中以PHSt 为聚合物链主体, 引入刚性单体甲基丙烯酸-9-蒽甲酯和柔性单体甲基丙烯酸羟乙酯( HEMA)合成了一系列不同 HEMA 含量的共聚物, 利用核磁共振氢谱(1H-NMR)、傅里叶变换红外光谱(FT-IR)、差示扫描量热仪(DSC)及原子力显微镜(AFM)等方法, 研究了其化学结构与热性能、成膜性、光刻性能之间的关系。 结果表明, 随着 HEMA 含量的增加, 聚合物的玻璃化转变温度从 118.4 ℃提高至 148.4 ℃, 显著拓宽了光刻过程中前后烘的温度加工窗口; 聚合物成膜性和孔洞情况得到明显改善, 且表面粗糙度降低了 67%; 酸扩散长度从 70 nm 降低至 22 nm, 提高了未曝光区域的酸扩散可控性; 增强了光刻胶与基底的黏附性, 在显影时间为 60 s 时, 能够获得具有良好对比度的光刻图案。

    Abstract:

    Poly(4-hydroxystyrene) protected with tert-butoxycarbonyl (PHS) is extensively employed in 248 nm photoresists due to its favorable deep-ultraviolet transmittance, alkaline solubility, and exceptional dry-etching resistance. However, its relatively low glass transition temperature (Tg) and poor film-forming properties significantly restrict the lithographic process window and overall performance. In this paper, a series of copolymers with different HEMA contents were synthesized by introducing rigid monomer 9-anthracene methyl methacrylate and flexible monomer hydroxyethyl methacrylate (HEMA) into PHSt main chains. The relationship between chemical structure and thermal properties, film-forming properties and lithography properties was studied by nuclear magnetic resonance spectroscopy (1H-NMR), Fourier-transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and atomic force microscopy (AFM). The results show that with the increase of HEMA content, Tg of the polymer increases from 118.4 ℃ to 148.4 ℃, which significantly broadens the temperature processing window of prebaking and post exposure baking during the lithography process. Film-forming properties and pores-forming issue of the copolymer are significantly improved, and the surface roughness is reduced by 67% . The acid diffusion length is reduced from 70 nm to 22 nm, which improves the controllability of acid diffusion in the unexposed area. The adhesion between the photoresist and the substrate is enhanced, and the lithography pattern with good contrast can be obtained when the development time is 60 s.

    参考文献
    相似文献
    引证文献
引用本文

张睿杰, 王雨楠, 廖耘皎, 张 凯, 杨鸣波.含甲基丙烯酸羟乙酯的聚对羟基苯乙烯型光刻成膜树脂的合成及性能[J].高分子材料科学与工程,2025,41(9):55-63. Ruijie Zhang, Yunan Wang, Yunjiao Liao, Kai Zhang, Mingbo Yang. Synthesis and Properties of Poly(4-hydroxystyrene)-Type Resist Polymers with Hydroxyethyl Methacrylate[J]. Polymer Materials Science & Engineering,2025,41(9):55-63.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-02-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司