常压溶剂法回收碳纤维布再制备复合材料的力学性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(12202218); 宁夏自然科学基金资助项目(2024AAC05003)


Mechanical Properties of Composites Reprepared with Carbon Fiber Fabric Recycled Using Solvent at Normal Pressure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用常压溶剂法降解树脂基体回收碳纤维布, 通过真空辅助树脂灌注成型技术(VARI)再制备复合材料, 对比了新鲜碳纤维布、回收碳纤维布(rCFF)及再处理回收碳纤维布制备的复合材料的力学性能及微观形貌。 结果显示, 常压溶剂法降解回收 rCFF 再制备的复合材料力学性能下降, 原因之一为 rCFF 上的残留树脂使新鲜树脂与纤维的界面黏结性能变差, 易引发孔隙等浇筑缺陷, 另一原因为 rCFF 的纤维丝排布规整度下降, 导致其本身的力学性能降低。将 rCFF 用含催化剂的溶剂再处理得到几乎无树脂残留的再处理回收碳纤维布, 用其制备的复合材料的拉伸强度为新鲜碳纤维布制备复合材料的 96.1% 。 但对 rCFF 进行多次回收再处理, 会加速其纤维丝排布规整度下降, 故再处理rCFF 时, 需平衡树脂残留减少与纤维丝排布规整度下降对其复合材料力学性能的影响。 因此, 提高再制备复合材料力学性能的主要途径为提高树脂基体降解程度及保留 rCFF 纤维丝排布规整度。

    Abstract:

    In this paper, the resin matrix was decomposed by solvent at normal pressure to recycle carbon fiber fabric, and the composite was reprepared by vacuum assisted resin infusion molding technology (VARI). The micromorphology and mechanical properties of the composites prepared with virgin carbon fiber fabric, recycled carbon fiber fabric (rCFF) and reprocessed recycled carbon fiber fabric were compared. The results show that one reason for the deterioration of mechanical properties of composite prepared with rCFF is that the residual resin on rCFF deteriorates the interface adhesion between fresh resin and fibers, and is prone to causing porosity and other infusion defects, the other reason is that the mechanical properties of rCFF are deteriorated due to the decrease in the regularity of fiber arrangement. The tensile strength of rCFF prepared composite is 96.1% of that of virgin carbon fiber fabric prepared composite. However, repeated recycling and reprocessing of rCFF would accelerate the decline in the regularity of its fiber arrangement, therefore, it is necessary to balance the opposite effects of residue resin and fiber arrangement regularity on the mechanical properties of the composites during rCFF reprocessing. Overall, the main ways to improve the mechanical properties of the reprepared rCFF reinforced materials are to enhance the degradation degree of resin matrix and retain the regularity of rCFF fiber filament arrangement.

    参考文献
    相似文献
    引证文献
引用本文

胡 婷, 康少付, 虎志强, 马吉祥, 母全祎.常压溶剂法回收碳纤维布再制备复合材料的力学性能[J].高分子材料科学与工程,2025,41(9):64-72. Ting Hu, Shaofu Kang, Zhiqiang Hu, Jixiang Ma, Quanyi Mu. Mechanical Properties of Composites Reprepared with Carbon Fiber Fabric Recycled Using Solvent at Normal Pressure[J]. Polymer Materials Science & Engineering,2025,41(9):64-72.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-02-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司