自引发水性聚氨酯的制备及其在阴极电泳涂料中的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

揭阳市(扬帆计划)引进创新创业团队和领军人才项目(CXTD2021001)


Preparation of Self Induced Waterborne Polyurethane and Its Application in Cathodic Electrophoretic Coatings
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中开发了一种新型的光固化自引发水性聚氨酯(WPUA), 以应对传统聚氨酯涂料中存在的有机溶剂挥发和环境污染等问题。采用自引发交联剂的策略, 通过将自引发基团引入水性聚氨酯体系中, 结合光固化技术, 实现了WPUA 材料的快速固化和交联。利用红外分析和核磁共振氢谱技术证实了自引发 WPUA 的成功合成。探究了n—NCO/ n—OH 值(R 值)和亲水基团含量对乳液和电泳漆膜性能的影响。结果表明, 在 R = 1.4, nPTMG-1000/ nDMAD= 1.3 时, 树脂材料具有优异的光固化活性和可耐 270 ℃ 未分解性, 且该电泳漆膜在金属基材上附着力达 0 级, 耐丙酮擦拭18 次无脱落。

    Abstract:

    The aim of this study was to develop a novel light-curing self-initiating waterborne polyurethane (WPUA) to cope with the problems of organic solvent volatilization and environmental pollution in conventional polyurethane coatings. The strategy of a self-initiating cross-linker was adopted to achieve rapid curing and crosslinking of the WPUA material by introducing self-initiating groups into the aqueous polyurethane system and combining with light-curing technology. The successful synthesis of self-initiated WPUA was confirmed by FT-IR and 1H-NMR. The effects of n—NCO/ n—OH (R value) and the content of hydrophilic groups on the properties of emulsion and electrophoretic paint film were also investigated, and the results show that the resin material has excellent light-curing activity and could withstand 270 ℃ without decomposition when the R-value is 1.4 and nPTMG-1000/ nDMAD is 1.3, the electrophoretic paint film has grade 0 adhesion on metal substrate and is resistant to acetone wiping for 18 times without peeling off.

    参考文献
    相似文献
    引证文献
引用本文

杨卓韬, 吴淑芳, 张 婷, 刘晓暄.自引发水性聚氨酯的制备及其在阴极电泳涂料中的应用[J].高分子材料科学与工程,2025,41(9):117-129. Zhuotao Yang, Shufang Wu, Ting Zhang, Xiaoxuan Liu. Preparation of Self Induced Waterborne Polyurethane and Its Application in Cathodic Electrophoretic Coatings[J]. Polymer Materials Science & Engineering,2025,41(9):117-129.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-02-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司