基于单体原位聚合方法的热塑性聚酰亚胺树脂制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

重点实验室稳定支持经费(JCKYS2024213001)


Preparation and Performance of Thermoplastic Polyimide Resin Based on Method of Polymerization Monomer Reagents
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用单体原位聚合方法, 以2,3,3′,4′-联苯四羧酸二酐(α-BPDA)为二酐单体, 4,4′-二氨基二苯醚(4, 4′-ODA)为二胺单体,精细调控二者的投料比例,通过高温扩链反应成功合成了不同相对分子质量的热塑性聚酰亚胺树脂。采用傅里叶变换红外光谱(FT-IR)、热重分析(TGA)、动态力学热分析(DMA)、简支梁冲击试验等分析表征方法,研究了相对分子质量与耐热性能、韧性性能的关系及影响机理。结果表明,采用单体原位聚合方法,可通过高温扩链反应获得热塑性聚酰亚胺树脂。随着相对分子质量的增加,玻璃化转变温度先升高后降低,最高可达341.6 ℃ ,拉伸强度最高可达106.0 MPa,5% 热分解温度(N2 )可达560.0 ℃ ,冲击强度从73.6 kJ/m2 提高到165.7 kJ/m2 ,表现出优异的耐热性能和韧性,可在复合材料成型阶段通过原位聚合实现相对分子质量的扩链增长,从而解决长期困扰热塑聚酰亚胺复合材料的成型工艺难题。

    Abstract:

    Thermoplastic polyimide resins with different molecular weight were synthesized via polymerization monomer reagents ( PMR ) method with chain extension reaction at high temperature, using 2, 3, 3′, 4′-biphenyltetracarboxylic dianhydride ( α-BPDA ) as dianhydride monomer and 4, 4′-oxydianiline ( ODA ) as diamine monomer. FT-IR, TGA, DMA and Charpy impact test were used to characterize and analyze the relationship between molecular weight, thermal resistance and toughness. The results show that the thermoplastic polyimide resin can be obtained through chain extension reaction at high temperatures by PMR method. As the molecular weight increases, the glass transition temperature first increases and then decreases, reaching the maximum valve of 341.6 ℃ . The tensile strength reaches up to 106.0 MPa at most, the 5% thermal decomposition temperature ( N2 ) is 560.0 ℃ , and the impact strength increases from 73.6 kJ/m2 to 165.7 kJ/m2, showing excellent thermal resistance and toughness. The PMR method can solve the long-standing molding process problem of thermoplastic polyimide composite materials by expanding molecular chain during molding stage.

    参考文献
    相似文献
    引证文献
引用本文

姚 磊, 孙劲松, 崔亓官, 包建文, 张 朋, 曹正华, 杨 涛.基于单体原位聚合方法的热塑性聚酰亚胺树脂制备与性能[J].高分子材料科学与工程,2025,41(10):22-30. Lei Yao, Jinsong Sun, Qiguan Cui, Jianwen Bao, Peng Zhang, Zhenghua Cao, Tao Yang. Preparation and Performance of Thermoplastic Polyimide Resin Based on Method of Polymerization Monomer Reagents[J]. Polymer Materials Science & Engineering,2025,41(10):22-30.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司