基于响应曲面法的连续竹纤维/聚乙烯复合丝材成形工艺参数优化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省高等学校自然科学基金资助项目(23KJB460028); 中国博士后科学基金(2023M730350)


Optimization of Continuous Bamboo Fiber/Polyethylene Composite Wires Forming Process Parameters Based on Response Surface Methodology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对天然植物纤维与热塑性材料成形过程中纤维长度受限的难点,文中采用3D 打印的方法实现了连续竹纤维(CBF)与聚乙烯(PE)的快速高质量成形。针对亲水CBF 与疏水PE 之间的界面结合较差问题,采用碱处理对CBF进行表面改性以增强CBF 与PE 之间的相容性,其次采用熔融沉积技术(FDM)打印一步成型CBF/PE 复合材料。为了探究成形工艺参数对复合丝材力学性能的影响,利用响应曲面法构建了拉伸强度随挤出工艺参数变化的数学模型, 探究了CBF 碱处理时间、CBF 直径及挤出温度对复合丝材拉伸强度的影响及3 个因素间的交互影响。结果表明, 增加碱处理时间,T-CBF 直径和挤出温度,拉伸强度先增大后减小。通过实验验证了所得模型的可靠性,并获得CBF/PE 复合丝材成型过程中的最佳工艺窗口,即碱处理时间为3.18 h,T-CBF 直径为0.19 mm 以及挤出温度为190.34 ℃ ,预测的拉伸强度为16.74 MPa。

    Abstract:

    To solve the difficulty of limited fiber length in forming process of natural plant fibers and thermoplastic materials, this paper proposed a rapid and high-quality 3D printing forming method for fabricating continuous bamboo fiber (CBF) reinforced polyethylene (PE) composites. In view of the poor compatibility between the interface of hydrophilic CBF and hydrophobic PE, alkali treatment was firstly applied to CBF, which enhanced the compatibility between CBF and PE. Then, the one-step CBF / PE composites were printed by fused deposition modeling (FDM). In order to explore the influence of forming process parameters on mechanical properties of composite wires, this paper used the response surface method to construct a mathematical model of tensile strength with extrusion process parameters, and explored the effects of CBF alkali treatment time, CBF diameter and extrusion temperature on tensile strength of composite wires and the interaction between the three factors. The results show that tensile strength increases firstly and then decreases with alkali treatment time, T-CBF diameter or extrusion temperature. Finally, the reliability of the model was verified by experiments, and the predicted tensile strength of CBF/PE composite wire is 16.74 MPa during forming process, that is, the alkali treatment time is 3.18 h, the T-CBF diameter is 0.19 mm, and the extrusion temperature is 190.34 ℃ .

    参考文献
    相似文献
    引证文献
引用本文

祖梦幻, 李 倩, 陈雅妮, 贾子文, 章 煌, 王传洋, 乔海玉.基于响应曲面法的连续竹纤维/聚乙烯复合丝材成形工艺参数优化[J].高分子材料科学与工程,2025,41(10):87-97. Menghuan Zu, Qian Li, Yani Chen, Ziwen Jia, Huang Zhang, Chuanyang Wang, Haiyu Qiao. Optimization of Continuous Bamboo Fiber/Polyethylene Composite Wires Forming Process Parameters Based on Response Surface Methodology[J]. Polymer Materials Science & Engineering,2025,41(10):87-97.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司