尖端辅助电极对静电纺丝多射流形成的影响机制
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江西省新能源工艺及装备中心开放基金(JXNE2020-07); 江西省教育厅科学技术研究项目(GJJ200740 ); 东华理工大学博士基金(DHBK2019169); 核技术应用教育部工程研究中心项目(HJSJYB2021-3)


Model Establishment of Tip-Assisted Electrospinning and Multi-Jet Formation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了探索尖端辅助电极静电纺丝技术及多射流产生的原理,首先利用Comsol 软件分析了辅助电极对静电纺丝区域电场分布的影响。结果表明,辅助电极的引入显著增强了喷丝头附近的电场强度,使得静电纺丝能够在较低电压下产生多股射流,从而在降低能耗的同时提高纺丝效率。此外,电场等势线随着辅助电极与喷丝头距离的减小而增多,导致垂直于等势线的电场力方向变化,进而引发液滴形变。然后采用高速摄影技术记录了液滴及多射流的运动过程,深入探究了液滴形变与多射流产生之间的关系,并通过图片二值化处理和Mathematica 软件拟合液滴表面曲线,建立了描述带电液滴表面形变与多射流生成关系的回归数学模型。理论分析与实验结果均证实,当液滴表面某点的曲率最大值与平均值之比超过4.52 时,将诱发射流的产生。研究为优化静电纺丝工艺提供了理论观点和实验依据。

    Abstract:

    To explore the principle of cutting-edge auxiliary electrode electrospinning technology and the generation of multiple jets, the influence of auxiliary electrodes on electric field distribution in electrospinning region was firstly analyzed using COMSOL software. The results indicate that the introduction of auxiliary electrodes significantly enhances the electric field intensity near the spinneret, enabling the generation of multiple jets in electrospinning at lower voltages, thereby reducing energy consumption and improving spinning efficiency. Moreover, the equipotential lines increase as the distance between auxiliary electrode and the spinneret decreases, leading to changes in the direction of the electric field force perpendicular to the equipotential lines, which in turn causes the deformation of droplet. High-speed photography was then employed to record the motion process of droplet and multiple jets, deeply exploring the relationship between droplet deformation and the generation of multiple jets. By binarizing the images and fitting the droplet surface curves by Mathematica software, a regression mathematical model describing the relationship between the deformation of charged droplet surface and the generation of multiple jets was established. Theoretical analysis and experimental results both confirm that when the ratio of the maximum curvature at a point on the droplet surface to the average curvature exceeds 4.52, the generation of jets will be induced. This paper provides theoretical insights and experimental evidence for optimizing electrospinning processes.

    参考文献
    相似文献
    引证文献
引用本文

吴宇珂, 刘 晨, 张 斌, 汪志成.尖端辅助电极对静电纺丝多射流形成的影响机制[J].高分子材料科学与工程,2025,41(10):98-110. Yuke Wu, Chen Liu, Bin Zhang, Zhicheng Wang. Model Establishment of Tip-Assisted Electrospinning and Multi-Jet Formation[J]. Polymer Materials Science & Engineering,2025,41(10):98-110.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司