原子力显微镜原位检测样品紫外老化功能的开发
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划(2024YFA1307400);国家自然科学基金资助项目(22327808); 吉林省科技发展计划(20210506011ZP, SKL202302031)


Development of In Situ Detection of Ultraviolet Aging of Samples by Atomic Force Microscopy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    紫外光老化是一种常见的环境因素,对许多材料的性能和寿命会产生重要影响。文中使用340 nm 紫外光源替代紫外老化试验箱中的UVA-340 荧光紫外灯光源进行紫外加速老化试验,采用紫外光从侧面和底部2 种技术方案照射原子力显微镜样品检测区域。通过对标准光栅进行形貌表征,表明紫外光源对原子力显微镜的成像分辨率和检测精度没有干扰。接着通过对聚乙烯薄膜材料样品紫外老化前后表面结构形貌和力学性能的检测,验证了基于原子力显微镜开发的原位检测样品紫外老化功能的适用性。文中开发的功能为研究材料紫外老化机理与材料结构改变之间的相关性提供了有力的检测手段。

    Abstract:

    Ultraviolet aging is a common environmental factor that significantly impacts the properties and lifespan of many materials. This paper used a 340 nm ultraviolet light source to replace the UVA-340 fluorescent ultraviolet lamp in the ultraviolet accelerated aging test. Two technical schemes were used to illuminate the atomic force microscope ( AFM ) sample detection area from the side and the bottom. Through morphological characterization tests on standard gratings, it is shown that the ultraviolet light source does not interfere with the imaging resolution and detection accuracy of AFM. Subsequently, by testing the surface structure morphology and mechanical properties of polyethylene film material samples before and after ultraviolet aging, the applicability of the in-situ detection function for ultraviolet aging of samples developed based on AFM is verified. The function developed in this paper provides a powerful detection method for exploring the correlation between the mechanism of material ultraviolet aging and the structural changes of materials.

    参考文献
    相似文献
    引证文献
引用本文

蔡明军, 王伟东, 曹自然, 王宏达.原子力显微镜原位检测样品紫外老化功能的开发[J].高分子材料科学与工程,2025,41(10):136-141. Mingjun Cai, Weidong Wang, Ziran Cao, Hongda Wang. Development of In Situ Detection of Ultraviolet Aging of Samples by Atomic Force Microscopy[J]. Polymer Materials Science & Engineering,2025,41(10):136-141.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司