Abstract:Poly (lactic acid) (PLA) and poly (butylene adipate-co-terephthalate) (PBAT) were used as matrices, Lyocell/PLA/PBAT composites were prepared through melt blending and injection molding by using a new type of regenerated cellulose fiber Lyocell fiber as reinforcing fiber. The influence of Lyocell fiber content on the structure and properties of the composites was investigated by mechanical property test, DSC, TGA, DMA, SEM, and Vicat softening temperature test. The results show that the crystallinity, mechanical properties, and Vicat softening temperature of PLA/PBAT composites are improved obviously by reinforcement of Lyocell fibers. The properties of Lyocell/PLA/PBAT composites increase firstly and then decrease with increasing content of Lyocell fiber. When the content of Lyocell fibers is 20% , Lyocell fibers are evenly dispersed in polymer matrices, and the composite exhibits the highest glass transition temperature and best comprehensive performance. Its tensile strength, elastic modulus, and Izod notched impact strength are increased by 41.6% , 81.3% and 90.6% respectively, compared to the PLA/PBAT composite. The Vicat softening temperature of 20% Lyocell/PLA/PBAT composite can reach 128.4 ℃ , which is 66.8 ℃ higher than that of PLA/PBAT composite.