注射打印工艺“壳-芯”界面熔融与热力学现象多尺度联合仿真
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52206095); 山东省自然科学基金资助项目(ZR2021QE232); 山东省高等学校青创科技支持计划(2023KJ102)


Multiscale Coupled Simulation for “Shell-Core” Interface Melting and Thermodynamic Phenomena in Injection Printing Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出以挤出打印零件外壳为自身模具进行内部注射填充的注射打印增材制造策略,为实现高效高强熔融沉积成型提供了一种解决方案。分析了不同工艺参数下注射打印成型机理,探究了注射阶段“ 壳-芯” 同质界面的热传导特性、壳层的热稳定性与变形行为,以及冷却阶段“壳-芯”界面的收缩和分离现象。结果表明,在注射阶段,壳层所受压力随注射流率和壳层厚度的增加而增大。壳层抵抗变形的能力及热稳定性随壳层厚度的增大而增大。同时,由于高温芯层与常温壳层之间的热交换,“壳-芯”界面处出现界面熔融。在冷却阶段,观察到因冷却而引起的外壳收缩变形,入口处出现凹陷现象;壳层与芯层之间由于收缩速度不同发生界面分离,且界面分离长度随着注射流率的增加而增加,随着壳层厚度的增加呈现出先增大后减小的趋势。

    Abstract:

    An injection printing additive manufacturing strategy was proposed, using the outer shell of extrusion-printed parts as its own mold for internal injection filling, to provide a solution for efficient and highstrength fused deposition modeling. In order to analyze the injection printing forming mechanism with different process parameters, the thermal conduction characteristics of the “ shell-core ” homogeneous interface during injection stage, the thermal stability and deformation behavior of shell layer, and the shrinkage and separation phenomena at the “shell-core” interface during cooling stage were investigated. Results show that during the injection stage, the pressure experienced by shell layer increases with injection flow rate and thickness of shell layer. The ability to resist deformation and thermal stability of shell layer also increase with the thickness of shell layer. Additionally, due to the heat exchange between the high-temperature core layer and the ambient-temperature shell layer, a phenomenon of interface melting occurs at the “shell-core” interface. During cooling stage, the shrinkage deformation of shell due to cooling causes depressions at the inlet. Besides, the interface separation between shell and core layers occurs due to their different shrinkage rates, and the interface separation length increases with increasing injection flow rate, and exhibits a trend of initially increasing and then decreasing with increasing shell thickness.

    参考文献
    相似文献
    引证文献
引用本文

朱家威, 王世檩, 王泽欣, Sain Mohini, 杨卫民, 曾宪奎, 鉴冉冉.注射打印工艺“壳-芯”界面熔融与热力学现象多尺度联合仿真[J].高分子材料科学与工程,2025,41(12):63-74. Jiawei Zhu, Shilin Wang, Zexin Wang, Mohini Sain, Weimin Yang, Xiankui Zeng, Ranran Jian. Multiscale Coupled Simulation for “Shell-Core” Interface Melting and Thermodynamic Phenomena in Injection Printing Process[J]. Polymer Materials Science & Engineering,2025,41(12):63-74.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-03-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司