基于权矩阵分析法的场协同扭转螺杆多目标正交优化设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52206095); 山东省自然科学基金资助项目(ZR2021QE232)


Multi Objective Orthogonal Optimization Design of Field Synergy Torsion Screw Based on Weight Matrix Analysis Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    螺杆作为挤出塑化系统的关键部件,其结构对挤出质量和精度有着至关重要的影响。文中采用数值模拟的方法对场协同扭转元件结构进行了正交试验优化设计,结合混合性能及传热性能对正交试验结果进行了权矩阵分析,确定了最优与最差扭转元件结构。随后,选取正交试验得到的最优与最差扭转元件结构组成2 种不同的场协同扭转螺杆,与普通螺杆进行了比较。结果表明,当场协同扭转元件的槽宽深比接近1 时,其综合性能最优。2 种场协同扭转螺杆的混合与传热性能均优于普通螺纹螺杆,其中装配有最优扭转元件的场协同扭转螺杆具有最佳的综合性能,这验证了权矩阵分析结果的准确性。根据聚合物场协同塑化输运混炼理论分析可知,场协同扭转元件能够诱导流体形成螺旋流动,改善速度场与速度梯度场、温度梯度场之间的协同性,进而达到提升螺杆综合性能的效果。

    Abstract:

    As a key component of the extrusion plasticization system, the structure of the screw has a crucial impact on extrusion quality and accuracy. This article used numerical simulation to conduct orthogonal experimental optimization design on the structure of the field synergy torsion element. The weight matrix analysis of the orthogonal experimental results was combined with the mixing performance and heat transfer performance to determine the optimal element structure. Subsequently, the optimal and worst element structures obtained from orthogonal experiments were selected to form two different field synergy torsion screws, which were compared with conventional screws. The results indicate that when the channel width to height ratio of the field synergy torsion element is close to 1, its comprehensive performance is optimal. The mixing and heat transfer performance of the two types of field cooperative twisted screws are superior to those of conventional threaded screws. Among them, the field synergy torsion screw equipped with optimal torsion element has the best comprehensive performance, which verified the accuracy of the weight matrix analysis results. According to the analysis of the polymeric field synergy principle, the field synergy torsion element can induce the formation of spiral flow in the fluid, improve the synergy between the velocity field, velocity gradient field, and temperature gradient field, and thus achieve the effect of enhancing the comprehensive performance of the screw.

    参考文献
    相似文献
    引证文献
引用本文

潘 威, 黄士争, 魏兴岳, 蒋新沛, 王世龙, 张 鹏, 杨卫民, 鉴冉冉.基于权矩阵分析法的场协同扭转螺杆多目标正交优化设计[J].高分子材料科学与工程,2025,41(12):106-115. Wei Pan, Shizheng Huang, Xingyue Wei, Xinpei Jiang, Shilong Wang, Peng Zhang, Weimin Yang, Ranran Jian. Multi Objective Orthogonal Optimization Design of Field Synergy Torsion Screw Based on Weight Matrix Analysis Method[J]. Polymer Materials Science & Engineering,2025,41(12):106-115.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-03-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司