无机杂化酚醛气凝胶研究进展
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

非金属材料创新中心创新基金资助(24TDA-2)


Advances in Inorganic Hybrid Phenolic Aerogels
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    酚醛气凝胶具有良好的力学性能,可解决氧化硅气凝胶力学性差这一限制应用的难题。然而,抗氧化和抗烧蚀性差限制了酚醛气凝胶在高温隔热领域的应用。无机杂化是提升酚醛气凝胶耐温性的有效措施,同时可提高其隔热和力学性能,近年来受到研究人员广泛关注。文中综述了无机杂化酚醛气凝胶的最新研究进展,从不同角度对制备方法和无机成分对性能的影响进行了归纳总结。首先,从酚醛来源的角度,结合原位聚合、粉体掺杂和后改性等不同无机成分引入方式阐述了无机杂化酚醛气凝胶的制备方法。然后,分析了无机成分的引入方式和含量、增强纤维对无机杂化酚醛气凝胶隔热、耐温和力学等性能的影响。最后,展望了无机杂化酚醛气凝胶在隔热领域的应用前景和发展趋势。

    Abstract:

    Phenolic aerogels have excellent mechanical properties, which can overcome shortcoming of silica aerogel in terms of poor mechanical properties. However, the poor oxidation and ablative resistance limit the application of phenolic aerogel in high-temperature insulation. Hybridization of inorganic components is an effective way to improve the high temperature resistance of phenolic aerogel, as well as thermal insulation and mechanical performance. In this paper, the latest researches of inorganic hybrid phenolic aerogels were reviewed, the preparation method and effects of inorganic components on the performance were summarized from different perspectives. Firstly, the preparation method of inorganic hybrid phenolic aerogels was introduced from the point of phenolic source and introduction way of inorganic component including in situ polymerization, powder doping and post-modification. Then, the effects of the introduction way and content of inorganic component and fiber reinforcement on thermal insulation, high temperature resistance and mechanical property of inorganic hybrid phenolic aerogels were analyzed. Finally, the application prospect and development trend of inorganic hybrid phenolic aerogels in the field of thermal insulation were outlooked.

    参考文献
    相似文献
    引证文献
引用本文

王智鑫, 孔 勇, 沈晓冬.无机杂化酚醛气凝胶研究进展[J].高分子材料科学与工程,2025,41(12):148-156. Zhixin Wang, Yong Kong, Xiaodong Shen. Advances in Inorganic Hybrid Phenolic Aerogels[J]. Polymer Materials Science & Engineering,2025,41(12):148-156.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-03-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司