面向数字光处理3D打印的高疏水可光固化有机硅聚氨酯材料
作者:
作者单位:

四川大学高分子研究所 先进高分子材料全国重点实验室,四川 成都 610065

作者简介:

通讯作者:

中图分类号:

基金项目:


Highly Hydrophobic Photocurable Silicone Polyurethane Material for Digital Light Processing 3D Printing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为解决传统有机硅树脂难以兼容光固化3D打印工艺,且高疏水性与力学性能难以兼得的技术难题,本研究以聚硅氧烷为软段,通过聚氨酯化学设计并合成了一系列可光固化有机硅聚氨酯树脂,成功应用于数字光处理(DLP)3D打印。研究表明,以聚硅氧烷为软段的体系(PUA15-PDMS)接触角达124°,表现出优异的疏水性能,但其力学性能(强度0.99 MPa)显著低于聚醚型体系(PUA15-PTMG,强度2.01 MPa)。分子动力学模拟与氢键类型统计分析揭示,聚二甲基硅氧烷(PDMS)体系力学性能劣化的根本原因并非氢键数量的减少,而是氢键网络拓扑结构的差异。PDMS软段因硅氧键难以作为氢键受体,被“排除”在氢键网络之外,导致应力无法有效传递。通过引入1, 4-丁二醇(BDO)扩链剂优化硬段结构,PUA12-BDO的强度和断裂伸长率分别提升至1.58 MPa和86%,同时保持接触角120°以上,实现了力学与疏水性的协同优化。该树脂黏度适宜(30 ℃以上<3000 mPa?s),热稳定性良好(T5%=281 ℃),DLP打印结构边缘清晰、细节完整,在高精度疏水功能器件的数字化制造领域具有应用潜力。

    Abstract:

    A series of photocurable silicone polyurethane resins were designed and synthesized via polyurethane chemistry using polysiloxane as soft segments, and successfully applied in digital light processing (DLP) 3D printing. The polysiloxane-based system (PUA15-PDMS) exhibits excellent hydrophobicity with a water contact angle of 124°, but its mechanical properties (tensile strength of 0.99 MPa) are significantly inferior to those of the polyether-based counterpart (PUA15-PTMG, 2.01 MPa). Molecular dynamics simulations and statistical analysis of hydrogen bond types reveal that the deteriorated mechanical performance of the PDMS system does not originate from a reduction in the density of hydrogen bonds, but from the distinct topology of the hydrogen-bonding network. Due to the poor hydrogen-accepting ability of siloxane bonds, the PDMS soft segments are excluded from the hydrogen-bonding network, leading to inefficient stress transfer. By introducing BDO as a chain extender to optimize the hard segment structure, the resulting PUA12-BDO resin achieves a tensile strength of 1.58 MPa and an elongation at break of 86%, while maintaining a contact angle above 120°, demonstrating synergistic a optimization of mechanical and hydrophobic properties. The resin exhibits suitable viscosity (<3000 mPa·s above 30 °C), good thermal stability (T5%=281 °C), and excellent printing accuracy with well-defined structures, showing great potential for the digital fabrication of high-precision hydrophobic functional devices.

    参考文献
    相似文献
    引证文献
引用本文
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2026-03-20
  • 录用日期:2026-04-23
  • 网络出版日期:2026-09-08
  • 在线发布日期:
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司