1,4-Bis(tert-butylperoxy) isopropylbenzene (BIPB), as a new “ odorless” crosslinking agent, is widely used in the crosslinking of polyethylene, ethylene-propylene-diene terpolymer and others. Domestic scholars mainly focused on the properties of the materials after crosslinking, and rarely delved in the study of crosslinking mechanisms. In this paper, crosslinkable polyethylene ( XLPE ) materials with different BIPB contents were prepared. The kinetics of crosslinking process were systematically investigated by non-isothermal and isothermal dynamic rheology, combined with an autocatalytic model. The results indicate that the crosslinking rate accelerates with increasing BIPB content; however, the activation energy of crosslinking reaction remains essentially unchanged. Meanwhile, the activation energy was also calculated by using the Fridgman non-isothermal method. It is found that the activation energy remains constant in the early stage of crosslinking and slightly decreases in the later stage. The calculated average activation energy is ( 150.04 ± 6.77 ) kJ/mol, which is consistent with the autocatalytic model.
参考文献
相似文献
引证文献
引用本文
李 婧.过氧化物 1,4-双叔丁基过氧异丙基苯交联聚乙烯的动力学[J].高分子材料科学与工程,2026,42(2):11-18. Jing Li. Crosslinking Kinetics of Polyethylene Initiated with 1,4-Bis(tert-butylperoxy)isopropylbenzene[J]. Polymer Materials Science & Engineering,2026,42(2):11-18.