聚丙烯腈原丝取向对碳纤维弹性模量的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

新材料重大专项资助项目(2025ZD0612600); 国家自然科学基金联合基金资助项目(U22B20142)


Effect of Polyacrylonitrile Precursor Orientation on Elastic Modulus of Carbon Fiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    借助于X射线衍射仪、声速取向度测量仪、拉曼光谱仪、红外光谱仪和力学性能测试等手段研究了聚丙烯腈(PAN)原丝取向对碳纤维微晶结构和弹性模量的影响。 结果表明,原丝取向通过影响预氧纤维取向、预氧芳香结构及预氧化程度,进而影响碳纤维微晶取向和微晶尺寸,从而影响碳纤维的弹性模量。 原丝取向程度越高,生成的预氧纤维取向越高,预氧化程度越低,预氧芳香结构尺寸越大,生成的碳纤维微晶堆砌越厚,石墨网平面尺寸越大,碳纤维晶区取向越高,因而碳纤维的弹性模量越大。 在一定范围内,可通过控制原丝取向程度调控碳纤维的弹性模量,原丝晶区取向因子增加 11.3% ,碳纤维弹性模量可增加 28.4% 。

    Abstract:

    Effect of different orientation structure of polyacrylonitrile ( PAN) precursor on microcrystalline structure and elastic modulus of carbon fibers were studied by X-ray diffraction, sound velocimeter, Raman spectrometer, Fourier transform infrared spectrometry and mechanical properties. The crystallite thickness, layer plane length and orientation of carbon fibers all increase with increasing the orientation of PAN precursor, leading to higher elastic modulus of carbon fibers. The orientation structure of PAN precursor has an effect on the formation and growth of microcrystalline structure of carbon fibers by influencing pre-oxidation process. Higher orientation of PAN precursor, higher orientation and ladder structure size of pre-oxidized fibers, higher orientation and microcrystallite size of carbon fibers. Higher orientation of PAN precursor, lower stabilization degree of preoxidized fiber, higher microcrystallite size of carbon fiber. The correlation between PAN precursor orientation and elastic modulus of carbon fiber indicates that controlling the orientation structure of PAN precursor during spinning stage can achieve the regulation of elastic modulus of carbon fibers. The orientation factor of the precursor crystal region is increased by 11.3% , and the elastic modulus of carbon fibers is increasd by 28.4% .

    参考文献
    相似文献
    引证文献
引用本文

赵洪江, 任 瑞, 曹维宇, 徐樑华, 张 珂, 李常清.聚丙烯腈原丝取向对碳纤维弹性模量的影响[J].高分子材料科学与工程,2026,42(2):39-46. Hongjiang Zhao, Rui Ren, Weiyu Cao, Lianghua Xu, Ke Zhang, Changqing Li. Effect of Polyacrylonitrile Precursor Orientation on Elastic Modulus of Carbon Fiber[J]. Polymer Materials Science & Engineering,2026,42(2):39-46.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-05-10
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司