硅烷偶联剂种类和用量对改性纳米 SiO2-TiO2 增强竹纤维/高密度聚乙烯性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金面上项目(32471790,32071685)


Effect of the Type and Dosage of Silane Coupling Agent on the Performance of Modified Nano-SiO2-TiO2 Enhanced Bamboo Fiber/HDPE
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中采用硅烷偶联剂改性纳米 SiO2-TiO2 以增强竹纤维/HDPE 复合材料(BPC),探讨了硅烷偶联剂种类和用量对改性效果的影响。 首先,采用 3 种硅烷偶联剂(KH550,KH560 和 KH570)对纳米 SiO2-TiO2 改性后添加到 BPC,通过改性前后 BPC 的微观形貌、耐水性及力学性能的比较,确定最优硅烷偶联剂种类;其次,对比不同用量的最优偶联剂改性的纳米 SiO2-TiO2 对 BPC 耐水性和力学性能的增强效果,确定最佳用量。 结果表明,傅里叶变换红外光谱和紫外-可见光吸收光谱分析证实,3 种硅烷偶联剂成功接枝于纳米 SiO2-TiO2 表面,并提高了其紫外屏蔽能力;对比 3种偶联剂改性纳米 SiO2-TiO2 对 BPC 耐水性和力学性能的影响,发现 5% KH550 改性效果最优;添加 5KH550-ST(5% KH550 改性纳米 SiO2-TiO2 )的 BPC,其 24 h 吸水率及厚度膨胀率较 BPC 分别降低了 13.89% 和 6.82% ,静态水接触角增大了 16.01°;弯曲强度和弯曲模量分别提高了 18.71% 和 17.94% ,拉伸强度和弹性模量分别提高了 7.75% 和21.92% ;紫外老化后,颜色稳定性提高,变化幅度减小。 因此,以硅烷偶联剂改性纳米 SiO2-TiO2 来增强竹纤维/HDPE,能实现复合材料性能的有效提升。

    Abstract:

    The silane coupling agents were used to modify nanosized SiO2-TiO2 to enhance the performance of bamboo fiber/HDPE composite materials (bamboo-plastic composite material, BPC) and explore the influence of the type and dosage of silane coupling agents on the modification effect. Firstly, three types of silane coupling agents (KH550, KH560 and KH570) were used to modify nano SiO2-TiO2, which was then added to BPC. The micro-morphology, water resistance and mechanical properties of BPC were comparatively analyzed before and after the modification, the optimal type of silane coupling agent was determined; secondly, the enhancement effects of the optimal coupling agent at different dosages on the water resistance and mechanical properties of BPC were compared to determine the best dosage. The results show that Fourier transform infrared spectroscopy (FTIR) and ultraviolet-visible absorption spectroscopy ( UV-Vis) analyses confirm that the three silane coupling agents were successfully grafted onto the surface of nano-SiO2-TiO2 and improve UV shielding capability. Comparing the effects of the three coupling agents on the water resistance and mechanical properties of the BPC modified with nano SiO2-TiO2, it is found that 5% KH550 has the best modification effect. The addition of 5KH550-ST to BPC reduces the 24 h water absorption rate and thickness expansion rate by 13.89% and 6.82%, respectively, while the static water contact angle is increased by 16.01°. The bending strength and bending modulus exhibit an increase of 18.71% and 17.94% , while the tensile strength and elastic modulus demonstrate an increase of 7.75% and 21.92% , respectively. The exhibited thermal stability is significantly improved; the color stability after UV irradiation is better and the color change is small. Therefore, using nano-SiO2-TiO2 modified with silane coupling agents to reinforce bamboo fiber/HDPE can effectively improve the performance of the composite materials.

    参考文献
    相似文献
    引证文献
引用本文

王星惠, 于孟言, 牛一米, 彭子鑫, 艾梦瑶, 高 珊.硅烷偶联剂种类和用量对改性纳米 SiO2-TiO2 增强竹纤维/高密度聚乙烯性能的影响[J].高分子材料科学与工程,2026,42(2):58-69. Xinghui Wang, Mengyan Yu, Yimi Niu, Zixin Peng, Mengyao Ai, Shan Gao. Effect of the Type and Dosage of Silane Coupling Agent on the Performance of Modified Nano-SiO2-TiO2 Enhanced Bamboo Fiber/HDPE[J]. Polymer Materials Science & Engineering,2026,42(2):58-69.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-05-10
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司