皮克林乳液法取向导热网络的构建及对三元乙丙橡胶导热性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国博士后科学基金(2024M751205); 连云港市博士后科研项目(LYGBSH2025012)


Construction of Pickering Emulsion Oriented Thermal Conductive Network and Its Effect on Thermal Conductivity of EPDM Rubber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    受天然贝壳珍珠母“砖-泥”层状结构的启发,采用纤维素纳米晶-氧化石墨烯(CNC-GO)作为杂化导热填料,以三元乙丙(EPDM)橡胶为基体,通过皮克林(Pickering)乳液模板法和热压还原效应,调控杂化导热填料在油/水界面的分布,形成“水包油”Pickering 乳液体系。 通过抽滤和热压工艺,制备出具有取向层状导热网络的 EPDM 导热复合材料。 结果发现,包裹在 EPDM 外的 CNC-GO 片层与 EPDM 紧密堆积,形成交联三维导热通路,不仅提升了 EPDM的导热性能,还赋予其优异的力学强韧性和耐热稳定性,EPDM 复合橡胶的拉伸应变最高可达 2157% ,相较于纯EPDM 提升了 5 倍,断裂韧性达到 961.6 kJ/m2,比纯 EPDM 提升了 275% ,热导率高达 3.865 W/(m·K),为低填充高导热橡胶复合材料的制备提供了一种简便、绿色可行的思路。

    Abstract:

    Inspired by the “ brick mud” layered structure of natural pearl, cellulose nanocrystals-graphene oxide ( CNC-GO) was adopted as hybrid thermal conductive fillers, and ethylene propylene diene monomer (EPDM) rubber was used as matrix, and the hybrid thermal conductive fillers were regulated to distribute at oil/water interface to form an “oil in water” Pickering emulsion system through Pickering emulsion template method and hot-pressing reduction effect. Thermally conductive EPDM composites with oriented layered thermal conductive networks were prepared through filtration and hot pressing processes. As a result, the CNC-GO layers wrapped around EPDM are tightly stacked with EPDM, forming a crosslinked three-dimensional thermal conductivity pathway, which not only enhances the thermal conductivity of EPDM, but also endows it with excellent mechanical properties and thermal stability. The tensile strain of EPDM composites can reach up to 2157%, which is 5 times higher than that of pure EPDM. The fracture toughness reaches 961.6 kJ/m2, 275% higher than that of pure EPDM, and the thermal conductivity of EPDM composites is as high as 3.865 W/(m·K). This work provides a simple, green and feasible approach for the preparation of low filling high thermal conductivity rubber composite materials.

    参考文献
    相似文献
    引证文献
引用本文

左 飞, 胡 杰, 徐沛宽, 李川龙, 李瑞光, 李成杰.皮克林乳液法取向导热网络的构建及对三元乙丙橡胶导热性能的影响[J].高分子材料科学与工程,2026,42(2):70-80. Fei Zuo, Jie Hu, Peikuan Xu, Chuanlong Li, Ruiguang Li, Chengjie Li. Construction of Pickering Emulsion Oriented Thermal Conductive Network and Its Effect on Thermal Conductivity of EPDM Rubber[J]. Polymer Materials Science & Engineering,2026,42(2):70-80.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-05-10
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司