基于聚二甲基硅氧烷基体的液态金属/空心玻璃微球协同网络实现高效微波吸收
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划项目(2022YFA1205200)


High-Efficiency Microwave Absorption Enabled by a Polydimethylsiloxane-Based Liquid Metal/Hollow Glass Microsphere Synergistic Network
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    高分子基电磁波吸收材料轻质、柔性、可设计性强,在航空航天等领域备受关注。 然而,传统磁性填料密度大、吸收带宽窄,难以满足下一代装备对轻量化和宽频吸收的需求。 为此,文中以聚二甲基硅氧烷(PDMS)为基体,通过简单机械研磨使液态金属(LM)均匀包覆空心玻璃微珠(HGS),构筑了 LM@HGS 核-壳颗粒,将其与 PDMS 复合,制备出多异质界面弹性体。 性能测试表明,该材料在厚度 2.99 mm 时,最小反射损耗达到-64.56 dB;当厚度降至 2.14 mm 时,有效吸收带宽(RL≤-10 dB)可覆盖 5.92 GHz,呈现出优异的电磁波吸收能力。 机理分析显示,偶极极化与界面极化协同放大了介电损耗,而核-壳及孔隙结构为电磁波提供了多重传播路径,促使波在内部经历反复反射与散射,两者共同造就了材料的高效吸收性能。 依托 PDMS 的柔韧性与 LM 包覆 HGS 的轻质特性,提出了一条简洁高效的非磁性吸波材料设计思路,为其在微波隐身与器件集成等领域的应用奠定了基础。

    Abstract:

    Polymer-based electromagnetic (EM) absorbers have attracted considerable interest in aerospace and related fields owing to their low density, mechanical flexibility and high structural tunability. Conventional magnetic fillers, however, suffer from high mass density and narrow absorption bandwidth, limiting their applicability to next-generation lightweight, broadband devices. In this study, polydimethylsiloxane (PDMS) was chosen as matrix, while liquid metal (LM) was uniformly coated onto hollow glass microspheres (HGSs) via a simple mechanical grinding process to form LM@HGS core-shell particles, which were subsequently embedded in PDMS to construct a multi-heterointerface elastomer. Electromagnetic characterization revealed a minimum reflection loss of - 64.56 dB at a thickness of 2.99 mm; even when the thickness is reduced to 2.14 mm, the effective absorption bandwidth ( RL ≤ - 10 dB) still spans 5.92 GHz, demonstrating outstanding broadband performance. Mechanistic analysis indicates that dipolar and interfacial polarizations act synergistically to enhance dielectric loss, while the core-shell architecture and inherent porosity afford multiple propagation paths that induce repeated internal reflection and scattering of incident microwaves, jointly accounting for the high absorption efficiency. Leveraging the intrinsic flexibility of PDMS and the low density of LM-coated HGSs, this work presents a concise and effective design strategy for non-magnetic EM absorbing materials, thereby providing a solid foundation for applications such as microwave stealth and on-chip device integration.

    参考文献
    相似文献
    引证文献
引用本文

李 博, 李亚龙, 刘雨杭, 刘大炜, 徐伟伟, 邬祚强, 宋志梅, 谢 康, 陈 枫.基于聚二甲基硅氧烷基体的液态金属/空心玻璃微球协同网络实现高效微波吸收[J].高分子材料科学与工程,2026,42(2):113-122. Bo Li, Yalong Li, Yuhang Liu, Dawei Liu, Weiwei Xu, Zuoqiang Wu, Zhimei Song, Kang Xie, Feng Chen. High-Efficiency Microwave Absorption Enabled by a Polydimethylsiloxane-Based Liquid Metal/Hollow Glass Microsphere Synergistic Network[J]. Polymer Materials Science & Engineering,2026,42(2):113-122.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-05-10
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司