Abstract:To overcome the core bottlenecks faced by electrospinning technology in practical applications, such as low production, high operating voltage, and needle clogging, this study precisely controlled the average diameter (MFD) and diameter uniformity (expressed by relative standard deviation, RSD) of polyvinyl alcohol (PVA) nanofibers by optimizing the spinning process parameters. This provides key guidance for morphology regulation and process stability for the large-scale preparation of high-performance PVA nanofibers through this technology. The COMSOL software was employed to simulate the electric field distribution characteristics of insulating and conductive rollers, focusing on analyzing the electric field intensity at the formation positions of Taylor cones on the metal wire surface. Based on an orthogonal experimental design, the effects of polymer solution concentration, spinning distance, operating voltage, and electrode diameter on the morphology of PVA nanofibers were systematically investigated. A multivariate regression model was constructed through response surface methodology to quantitatively assess the interaction mechanisms among these factors. The results show that the experimentally prepared PVA nanofibers have an average diameter range of 209.02~320.37 nm with a relative standard deviation of 15.21% ~22.41% . The polymer solution concentration and spinning distance have statistically significant effects on MFD (p<0.05), while the effects of operating voltage and electrode diameter on MFD are relatively insignificant ( p > 0.05 ). The diameter of PVA nanofibers is positively correlated with solution concentration and working voltage, and negatively correlated with spinning distance and electrode diameter.