热塑性聚氨酯 / 二氧化硅超疏水辐射降温及隔热保温协同作用的多孔膜涂层材料的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52573300);陕西省重点研发计划国际科技合作重点项目(2023-GHZD-09);陕西省重点研发计划秦创原“科学家+工程师”队伍建设项目(2023KXJ-069);陕西省重点研发计划三项改革综合试点(2023GXLH-070);陕西省教育厅重点科学研究计划项目(22JY011)


Preparation and Properties of Thermoplastic Polyurethane / Silica Porous Coating Materials with Synergistic Effects of Superhydrophobic Radiative Cooling and Thermal Insulation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    被动日间辐射降温能够有效降低全球对制冷需求的能源消耗,然而传统辐射降温材料在冬天使用时存在过度制冷的问题,会导致供暖需求增加,加剧能源消耗。 因此,文中将具有高中红外发射特性的热塑性聚氨酯(TPU)和具有高太阳光反射特性的二氧化硅(SiO2)纳米粒子进行复合,采用牺牲模板法制备了辐射降温与隔热保温协同作用的多孔膜涂层材料。 超疏水 TPU/ SiO2 多孔膜涂层材料在太阳波段平均反射率可达 97% ,大气透明窗口平均发射率可达 96.4% ,热导率低至 0.071 W/ (m·K),接触角为 157°±1.5°,滚动角为 2°±0.5°。 在日间平均太阳辐照度 664.2 W/ m2下,超疏水多孔膜涂层材料可以实现平均 7.4 ℃的降温。 超疏水多孔膜涂层材料不仅克服了低温环境中的过度制冷问题,在冬季夜间可实现平均约 0.59 ℃的保温,其优异的超疏水性能还保障了户外降温性能的长久稳定。

    Abstract:

    Passive daytime radiative cooling can effectively reduce the energy consumption for global cooling demand. However, traditional radiative cooling materials have the problem of excessive cooling when used in winter, which leads to an increase in heating demand and intensifies energy consumption. Therefore, in this paper, by combining thermoplastic polyurethane (TPU) with high and medium infrared emission characteristics and silicon dioxide (SiO2) nanoparticles with high solar reflection characteristics, a porous coating material with the synergistic effect of radiative cooling and heat insulation was prepared by sacrificial template method. The superhydrophobic TPU / SiO2 porous coating material has an average reflectivity of up to 97% in the solar band, an average emissivity of up to 96.4% in the atmospheric transparent window, a thermal conductivity as low as 0.071 W/ (m·K), a contact angle of 157° ± 1.5°, and a rolling angle of 2° ± 0.5°. Under the average daytime solar irradiance of 664.2 W/ m2, the superhydrophobic porous coating material can achieve an average cooling of 7.4 ℃. This superhydrophobic porous coating material not only overcomes the problem of excessive cooling in lowtemperature environments, achieving an average insulation of approximately 0.59 ℃ at night in winter, but also ensures the long-term stability of outdoor cooling performance due to its excellent superhydrophobic properties.

    参考文献
    相似文献
    引证文献
引用本文

屈园园, 薛朝华, 柳冰莹, 朱媛媛, 马超群, 晏燕燕, 高 奇.热塑性聚氨酯 / 二氧化硅超疏水辐射降温及隔热保温协同作用的多孔膜涂层材料的制备及性能[J].高分子材料科学与工程,2026,42(6):126-137. Yuanyuan Qu, Chaohua Xue, Bingying Liu, Yuanyuan Zhu, Chaoqun Ma, Yanyan Yan, Qi Gao. Preparation and Properties of Thermoplastic Polyurethane / Silica Porous Coating Materials with Synergistic Effects of Superhydrophobic Radiative Cooling and Thermal Insulation[J]. Polymer Materials Science & Engineering,2026,42(6):126-137.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-10-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司