基于黏性耗散温升平均值法表征微尺度聚合物熔体真实流变行为
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川省科技厅项目(2023NSFSC0873)


Characterizing the True Rheological Behavior of Microscale Polymer Melts Based on the Average Temperature Rise Method of Viscous Dissipation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对微注塑成型时剪切速率较高、黏性耗散严重导致熔体温度升高,进而影响黏度测量精度的问题,文中提出了一种基于黏性耗散测量温升的平均值法来对实际测量黏度进行修正,以获取微尺度下聚合物熔体的真实流变特性。 利用双料筒毛细管流变仪,测试了聚丙烯(PP)在直径 500 μm 毛细管口模内不同剪切速率下的黏度和黏性耗散温升。 通过对黏度进行修正,采用数值模拟与实验测试压力进行对比验证。 结果表明,修正后的熔体黏度仿真压力接近实验压力。 在 220 ℃,240 ℃和 260 ℃ 3 种入口温度时,修正后模拟压力与实验压力的平均相对误差为 2.83% ,最大局部误差为 4.82% ;未修正模拟压力的平均相对误差为 9.24% ,最大局部误差为 15.81% 。

    Abstract:

    Aiming at the problem that the high shear rate during micro-injection molding leads to a rise in melt temperature due to viscous dissipation, which further affects the accuracy of viscosity measurement, in this paper an average-value method based on measuring temperature rise from viscous dissipation to correct the measured viscosity was proposed, so as to obtain the real rheological properties of polymer melts at the microscale. A twinbore capillary rheometer was used to measure the viscosity and viscous dissipation temperature rise of polypropylene (PP) at different shear rates in a capillary die with a diameter of 500 μm. The viscosity was corrected, and the numerical simulation was compared with the experimental pressure for verification. The results show that the simulated pressure based on the corrected melt viscosity is closer to the experimental pressure. At the three inlet temperatures of 220 ℃, 240 ℃ and 260 ℃, the average relative error between the corrected simulated pressure and the experimental pressure is 2.83% , with a maximum local error of 4.82% ; the average relative error of the uncorrected simulated pressure is 9.24% , with a maximum local error of 15.81% .

    参考文献
    相似文献
    引证文献
引用本文

赵梦圆, 徐 斌, 程 淋, 安晓玉.基于黏性耗散温升平均值法表征微尺度聚合物熔体真实流变行为[J].高分子材料科学与工程,2026,42(6):171-178. Mengyuan Zhao, Bin Xu, Lin Cheng, Xiaoyu An. Characterizing the True Rheological Behavior of Microscale Polymer Melts Based on the Average Temperature Rise Method of Viscous Dissipation[J]. Polymer Materials Science & Engineering,2026,42(6):171-178.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-10-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司